<div style="color:black;font: 10pt arial;">
<div>Bob,</div>

<div><br>
</div>

<div>FWIW; I have been running 1/4 inch spacers behind the hubs on the rear of my BJ8 for over 40 years.  No problems - no lost wheels either!!  :)  On really hard cornering the tires have slight rub on the two bolts which mount the bump stop boxes.</div>

<div>I run Jaguar 72 spoke wires which have more/less offset (not sure which) than stock Healey wheels so the need for more clearance for tires.  For many many years I ran 185/15 Michelin Redlines but now have 185/15 Vredenstein from Hendrix.</div>

<div>Again FWIW</div>

<div>Keith</div>
<br>
<br>

<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: Robert Begani <rfbegani@gmail.com><br>
To: healeys <healeys@autox.team.net><br>
Sent: Tue, Feb 18, 2020 5:39 pm<br>
Subject: [Healeys] Michelin 180/ R15 XAS tires Fill up the wheel well too much and rub on late 67 BJ8<br>
<br>

<div dir="ltr">Listeners:<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">I decided to use the larger 180/R XAS because those of you who owned them<br>
</div>

<div dir="ltr">indicated they fill up the wheel well and do not rub.  The first 100 miles I<br>
</div>

<div dir="ltr">did not hear or feel any rubbing until  I took a couple of sharp turns and<br>
</div>

<div dir="ltr">heard rubbing on the rear tires.   Because I am replacing the fuel pump, I<br>
</div>

<div dir="ltr">had the opportunity to look carefully at the cause of the rubbing.  On the<br>
</div>

<div dir="ltr">right rear wheel the rubbing is evident at the edge of the dog leg as you<br>
</div>

<div dir="ltr">can see in first picture.  My dog legs have been repaired during the frame<br>
</div>

<div dir="ltr">off restoration with a skin panel and the dimensions may not be original.  <br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Last picture the lower part of the panel is 9 1/2 inches to the door frame.<br>
</div>

<div dir="ltr">The  one on the other side is 9 1/8 inches long. As you can see the gap with<br>
</div>

<div dir="ltr">the wheel in the second to last picture.  It has a larger gap than the right<br>
</div>

<div dir="ltr">side.   However, that dog leg shows wear also.  As you can see in the second<br>
</div>

<div dir="ltr">picture inside the dog leg skin on the right side attaches to the frame on<br>
</div>

<div dir="ltr">an angle.  I am proposing slicing off one inch of skin.  I have a friend who<br>
</div>

<div dir="ltr">is an artist with a cutoff saw, can weld a bead on anything and create a<br>
</div>

<div dir="ltr">rolled edge.  What would you say to this fix?<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Also, on the inside of the wheel well you can see the nut holding the radius<br>
</div>

<div dir="ltr">arm sticks out from the indentation into the well and shows light rubbing on<br>
</div>

<div dir="ltr">the tire.  I am proposing cutting off the excess thread and then giving it a<br>
</div>

<div dir="ltr">smooth dressing which would not disturb the strength of the bolt and or<br>
</div>

<div dir="ltr">cause it to unscrew.  What do you think of this fix?<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Of course, a little paint afterwards.  <br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">I like the ride of the tires and the feel of the road.  I want to keep them.<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Regards,<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Bob Begani<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr"><br>
</div>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" target="_blank" rel="noopener noreferrer">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" target="_blank" rel="noopener noreferrer">http://www.team.net/pipermail/healeys </a><a href="http://autox.team.net/archive" target="_blank" rel="noopener noreferrer">http://autox.team.net/archive</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" rel="noopener noreferrer" ymailto="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" target="_blank" rel="noopener noreferrer">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/llennep@verizon.net" target="_blank" rel="noopener noreferrer">http://autox.team.net/mailman/options/healeys/llennep@verizon.net</a><br>
<br>

<br>










</div>
</div>