<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=us-ascii" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 11.00.10570.1001"></HEAD>
<BODY>
<DIV><FONT size=2 face=Arial><SPAN
class=142475423-26012020>Hello,</SPAN></FONT></DIV>
<DIV><FONT size=2 face=Arial><SPAN
class=142475423-26012020></SPAN></FONT> </DIV>
<DIV><FONT size=2 face=Arial><SPAN class=142475423-26012020>Has anyone
experienced a problem fitting the steering wheel onto the splined steering
shaft? I can get the steering wheel hub to go onto the shaft the length of the
collet but then it hits a dead stop. I have checked both the male and female
splines and there are no obvious problems. The steering wheel is from a Mk 1 BT7
and the steering box is from a BJ7 and they have never been together before. The
fit should be loose enough to allow the hub to slide on the shaft but that
doesn't seem to be the case. It seems like either the OD of the shaft to too
large or the ID of the hub too small.</SPAN></FONT></DIV>
<DIV><FONT size=2 face=Arial><SPAN
class=142475423-26012020></SPAN></FONT> </DIV>
<DIV><FONT size=2 face=Arial><SPAN class=142475423-26012020>Any help is
appreciated.... Harold</SPAN></FONT></DIV>
<DIV><FONT size=2 face=Arial><SPAN
class=142475423-26012020></SPAN></FONT> </DIV>
<DIV><FONT size=2 face=Arial><SPAN
class=142475423-26012020></SPAN></FONT> </DIV></BODY></HTML>