<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>M11 is not a standard metric size. Extremely unlikely you will
ever come across this thread anywhere. <br>
</p>
<p>Standard is either M10x1,5 or M12x1,75. <br>
</p>
<p>15TPI gives 1,69 mm per thread so the M12 die could loosely fit
the stud. <br>
</p>
<p>M11x1,0 or M11x1,5 is very rarely used as a repair thread when an
M12 stud/bolt or an M10 tap hole or nut is damaged and cannot be
replaced or the thread is used in a very specific construction
where bolts/nuts are calculated to the limit or other engineering
purposes.</p>
<p>What you have is probably one of the many 7/16" diameter British
or Unified threads. <br>
</p>
<p>Kees Oudesluijs</p>
<p><br>
</p>
<p><br>
</p>
<div class="moz-cite-prefix">Op 4-1-2020 om 16:52 schreef Charles
Schott:<br>
</div>
<blockquote type="cite"
cite="mid:46682972.5094380.1578153159707.JavaMail.zimbra@knology.net">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div style="font-family: times new roman, new york, times, serif;
font-size: 12pt; color: #000000">
<div>The thread count appears to be 15 TPI. I have a 14 and a 16
TPI gage and it's between those two. Since a 12M X 1.5 die
runs all the way down the threads, albeit loosely, and a 10M X
1.5 tap goes all the way through the slotted nut, again very
loose, I think that it's metric. The diameter measures 10.97
MM with calipers and converted. I have not been able to find a
11M X 1.5 nut, let alone a slotted one. I have three of them
but need three more.</div>
<div><br>
</div>
<div>Regards,</div>
<div><br>
</div>
<div>Charlie </div>
<div><br>
</div>
<hr id="zwchr">
<div
style="color:#000;font-weight:normal;font-style:normal;text-decoration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From:
</b>"Harold Manifold" <a class="moz-txt-link-rfc2396E"
href="mailto:manifold@telus.net"><manifold@telus.net></a><br>
<b>To: </b>"Charles Schott" <a class="moz-txt-link-rfc2396E"
href="mailto:schottc@knology.net"><schottc@knology.net></a>,
"Michael Salter" <a class="moz-txt-link-rfc2396E"
href="mailto:michaelsalter@gmail.com"><michaelsalter@gmail.com></a><br>
<b>Cc: </b>"Healeys" <a class="moz-txt-link-rfc2396E"
href="mailto:healeys@autox.team.net"><healeys@autox.team.net></a><br>
<b>Sent: </b>Friday, January 3, 2020 6:27:29 PM<br>
<b>Subject: </b>RE: [Healeys] Tie Rod End Slotted Nuts<br>
<div><br>
</div>
<div dir="ltr" align="left"><span class="358172400-04012020"><span
color="#0000ff" size="2" face="Arial"
data-mce-style="color: #0000ff; font-family: Arial;
font-size: small;" style="color: #0000ff; font-family:
Arial; font-size: small;">Charles,</span></span></div>
<div dir="ltr" align="left"><span class="358172400-04012020"><span
color="#0000ff" size="2" face="Arial"
data-mce-style="color: #0000ff; font-family: Arial;
font-size: small;" style="color: #0000ff; font-family:
Arial; font-size: small;"></span></span> </div>
<div dir="ltr" align="left"><span class="358172400-04012020"><span
color="#0000ff" size="2" face="Arial"
data-mce-style="color: #0000ff; font-family: Arial;
font-size: small;" style="color: #0000ff; font-family:
Arial; font-size: small;">What is the thread per
inch count and the major thread diameter of the ball
joint (measure with a vernier or micrometer)?</span></span></div>
<br>
<div class="OutlookMessageHeader" dir="ltr" lang="en-us"
align="left">
<hr> <span size="2" face="Tahoma"
data-mce-style="font-family: Tahoma; font-size: small;"
style="font-family: Tahoma; font-size: small;"><b>From:</b>
Healeys [<a class="moz-txt-link-freetext"
href="mailto:healeys-bounces@autox.team.net">mailto:healeys-bounces@autox.team.net</a>]
<b>On Behalf Of </b>Charles Schott<br>
<b>Sent:</b> Friday, January 03, 2020 3:36 PM<br>
<b>To:</b> Michael Salter<br>
<b>Cc:</b> Healeys<br>
<b>Subject:</b> Re: [Healeys] Tie Rod End Slotted Nuts<br>
</span><br>
</div>
<div style="FONT-SIZE: 12pt; FONT-FAMILY: times new roman, new
york, times, serif; COLOR: #000000">
<div>My car is CE# 226706 and I have a limited set of BSF
taps and dies and none of them come close.</div>
<div><br>
</div>
<div>The 12M X 1.5 die goes loosely all the way down over
the stud threads. When I measure the diameter of the stud
threads, they measure 10.97 mm. You tell me what I have.</div>
<div><br>
</div>
<div>Regards,</div>
<div><br>
</div>
<div>Charlie</div>
<div><br>
</div>
<hr id="zwchr">
<div style="FONT-SIZE: 12pt; TEXT-DECORATION: none;
FONT-FAMILY: Helvetica,Arial,sans-serif; FONT-WEIGHT:
normal; COLOR: #000; FONT-STYLE: normal"><b>From: </b>"Michael
Salter" <a class="moz-txt-link-rfc2396E"
href="mailto:michaelsalter@gmail.com"><michaelsalter@gmail.com></a><br>
<b>To: </b>"Charles Schott" <a
class="moz-txt-link-rfc2396E"
href="mailto:schottc@knology.net"><schottc@knology.net></a><br>
<b>Cc: </b>"Michael MacLean" <a
class="moz-txt-link-rfc2396E"
href="mailto:rrengineer.mike@att.net"><rrengineer.mike@att.net></a>,
"Healeys" <a class="moz-txt-link-rfc2396E"
href="mailto:healeys@autox.team.net"><healeys@autox.team.net></a><br>
<b>Sent: </b>Friday, January 3, 2020 3:32:01 PM<br>
<b>Subject: </b>Re: [Healeys] Tie Rod End Slotted Nuts<br>
<div><br>
</div>
<div dir="ltr">
<div class="gmail_default" style="FONT-SIZE: small;
FONT-FAMILY: comic sans ms,sans-serif">Charlie, <br>
</div>
<div class="gmail_default" style="FONT-SIZE: small;
FONT-FAMILY: comic sans ms,sans-serif">If your car is
prior to C.E.#228931 the castellated nuts for the
original side and center rod ends will be part #2K3996
which I think is 7/16" BSF, (I don't have one to hand
to check) however many of these ball joints have been
replaced with the later UNF style over the years and
they use FNZ307 7/16" UNF.</div>
<div class="gmail_default" style="FONT-SIZE: small;
FONT-FAMILY: comic sans ms,sans-serif"><br>
</div>
<div class="gmail_default" style="FONT-SIZE: small;
FONT-FAMILY: comic sans ms,sans-serif">M<br>
</div>
<div class="gmail_default" style="FONT-SIZE: small;
FONT-FAMILY: comic sans ms,sans-serif"><br>
</div>
<div class="gmail_default" style="FONT-SIZE: small;
FONT-FAMILY: comic sans ms,sans-serif"><br>
</div>
<div class="gmail_default" style="FONT-SIZE: small;
FONT-FAMILY: comic sans ms,sans-serif"><br>
</div>
</div>
<br>
<div class="gmail_quote">
<div class="gmail_attr" dir="ltr">On Fri, Jan 3, 2020 at
4:09 PM Charles Schott <<a
href="mailto:schottc@knology.net" target="_blank"
moz-do-not-send="true">schottc@knology.net</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="PADDING-LEFT:
1ex; BORDER-LEFT: rgb(204,204,204) 1px solid; MARGIN:
0px 0px 0px 0.8ex">
<div>
<div style="FONT-SIZE: 12pt; FONT-FAMILY: times new
roman,new york,times,serif; COLOR: rgb(0,0,0)">
<div>I need three slotted nuts for the original
tie rod ends on a BN1. They appear to be metric
11M X 1.5 but I cannot find them. Does anyone
have them or know where I can get them? Thanks.</div>
<div><br>
</div>
<div>Regards,</div>
<div><br>
</div>
<div>Charlie</div>
<div><br>
</div>
<hr id="gmail-m_3280810070890447088zwchr">
<div style="FONT-SIZE: 12pt; TEXT-DECORATION:
none; FONT-FAMILY: Helvetica,Arial,sans-serif;
FONT-WEIGHT: normal; COLOR: rgb(0,0,0);
FONT-STYLE: normal"><br>
_______________________________________________<br>
Support Team.Net <a
href="http://www.team.net/donate.html"
target="_blank" moz-do-not-send="true">http://www.team.net/donate.html</a><br>
Suggested annual donation $12.75<br>
<div><br>
</div>
Archive: <a
href="http://www.team.net/pipermail/healeys"
target="_blank" moz-do-not-send="true">http://www.team.net/pipermail/healeys</a>
<a href="http://autox.team.net/archive"
target="_blank" moz-do-not-send="true">http://autox.team.net/archive</a><br>
<div><br>
</div>
<a href="mailto:Healeys@autox.team.net"
target="_blank" moz-do-not-send="true">Healeys@autox.team.net</a><br>
<a
href="http://autox.team.net/mailman/listinfo/healeys"
target="_blank" moz-do-not-send="true">http://autox.team.net/mailman/listinfo/healeys</a><br>
<div><br>
</div>
Unsubscribe/Manage: <a
href="http://autox.team.net/mailman/options/healeys/schottc@knology.net"
target="_blank" moz-do-not-send="true">http://autox.team.net/mailman/options/healeys/schottc@knology.net</a><br>
<div><br>
</div>
</div>
<div><br>
</div>
</div>
</div>
_______________________________________________<br>
Support Team.Net <a
href="http://www.team.net/donate.html"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://www.team.net/donate.html</a><br>
Suggested annual donation $12.75<br>
<div><br>
</div>
Archive: <a
href="http://www.team.net/pipermail/healeys"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://www.team.net/pipermail/healeys</a>
<a href="http://autox.team.net/archive"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://autox.team.net/archive</a><br>
<div><br>
</div>
<a href="mailto:Healeys@autox.team.net"
target="_blank" moz-do-not-send="true">Healeys@autox.team.net</a><br>
<a
href="http://autox.team.net/mailman/listinfo/healeys"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://autox.team.net/mailman/listinfo/healeys</a><br>
<div><br>
</div>
Unsubscribe/Manage: <a
href="http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com</a><br>
<div><br>
</div>
</blockquote>
</div>
</div>
<div><br>
</div>
</div>
</div>
<div><br>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
Support Team.Net <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Suggested annual donation $12.75
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a> <a class="moz-txt-link-freetext" href="http://autox.team.net/archive">http://autox.team.net/archive</a>
<a class="moz-txt-link-abbreviated" href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a>
<a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a>
Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl">http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl</a>
</pre>
</blockquote>
</body>
</html>