<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Oil pumps, vane, rotary and gear type are all positive displacement devices, meaning that they will continue to build pressure against resistance to the point where something breaks. That is why they are all equipped with a bypass valve which limits the amount
of pressure in the system. The amount of stress on the geardtrain is directly proportional to the pressure developed. I'm not sure if the problems related to the rotary type pumps is a result of the stress of driving the pump or to the larger pressure pulses
(vibration) that are inherent in the design. </div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
The manufacturer selects the bypass valve and spring assembly that will keep the pressure within a safe range while protecting the drive system from over stress. The four cylinder engines are supposed to run at a maximum of 50-55 PSI, the sixes somewhat lower,
and it is the bypass valve that maintains that pressure even though the pump itself is capable of much higher pressures if it encounters excessive resistance. </div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Viscosity change in the oil when at higher temperatures will reduce pressure by reducing the resistance of the oil circulating through the various clearances in the engine. As the engine wears these clearances will increase thus reducing resistance and dropping
oil pressure. Oil pressure alone is not as important as is a constant flow of oil to all components combined with the film strength of a good quality oil. </div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Bill Lawrence</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
BN1 #554</div>
<div id="appendonsend"></div>
<hr style="display:inline-block;width:98%" tabindex="-1">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt" color="#000000"><b>From:</b> Healeys <healeys-bounces@autox.team.net> on behalf of Kees Oudesluijs <coudesluijs@chello.nl><br>
<b>Sent:</b> Wednesday, January 1, 2020 6:37 PM<br>
<b>To:</b> healeys@autox.team.net <healeys@autox.team.net><br>
<b>Subject:</b> Re: [Healeys] Oil Pumps</font>
<div> </div>
</div>
<div class="BodyFragment"><font size="2"><span style="font-size:11pt;">
<div class="PlainText">Absolutely correct. There may be theoretically a tiny difference,
<br>
immeasurable probably, caused by the efficiency of the various pumps.<br>
<br>
Kees Oudesluijs<br>
<br>
Op 1-1-2020 om 19:24 schreef Bob Spidell:<br>
><br>
> I'm not a fluid dynamicist, but wouldn't, say, 45psi from either a <br>
> vane/rotor type pump put the same load on the cam gear and driveshaft <br>
> as 45psi from a gear-type pump, all other factors--oil viscosity, <br>
> etc.--being equal? Or, is there some other factor(s) at play? Do the <br>
> gear-type pumps produce lower pressure (seems to me that's the only <br>
> way they'd reduce the load on the gears and the cam thrust plate)?<br>
><br>
> Bob<br>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a><br>
Suggested annual donation $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a>
<a href="http://autox.team.net/archive">http://autox.team.net/archive</a><br>
<br>
Healeys@autox.team.net<br>
<a href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/ynotink@msn.com">
http://autox.team.net/mailman/options/healeys/ynotink@msn.com</a><br>
<br>
</div>
</span></font></div>
</body>
</html>