<div dir="ltr">Linwood<div><br></div><div>I cannot suggest the best way of fitting but be very careful. It is easy to get the bonnet/hood stuck in the closed position and there is no easy way to get under the bonnet to release it if gets jammed. I had to use a little brute force to release mine and then touch up the paint.</div><div><br></div><div>Best regards</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, 16 Nov 2019 at 00:27, Linwood Rose via Healeys <<a href="mailto:healeys@autox.team.net">healeys@autox.team.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="auto"><span style="color:rgb(34,34,34);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(255,255,255)">I mounted my bonnet after a total disassembly and then restoration of my car a little more than ten years ago. I recall that getting things aligned properly was a bit fiddly. I am now installing a different bonnet (long story) and my photos, indexing holes and etc. are only somewhat helpful since the “new” bonnet doesn’t have the indexing holes and the alignment is a little different.</span><br style="color:rgb(34,34,34);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(255,255,255)"><br style="color:rgb(34,34,34);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(255,255,255)"><span style="color:rgb(34,34,34);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(255,255,255)">I have the bonnet secured to the hinges and it seems to be fitting pretty well side-to-side and front-to-back. Of course, the front is a little low since the striker assembly is not yet mounted. Can anyone who has been through this offer any tips or suggestions on how to best proceed? Alternatively, pointing me to a reference on this subject would be great. There sure isn’t much of anything in the shop manual about it.</span><br style="color:rgb(34,34,34);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(255,255,255)"><br style="color:rgb(34,34,34);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(255,255,255)"><span style="color:rgb(34,34,34);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(255,255,255)">Thanks as always!</span><br><br><div dir="ltr">Sent from my iPad</div></div>_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <a href="http://autox.team.net/archive" rel="noreferrer" target="_blank">http://autox.team.net/archive</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/ah100register@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/ah100register@gmail.com</a><br>
<br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature"><div dir="ltr">Best wishes<div><br></div><div>John Harper</div><div><br></div><div>AHC UK 100 Register Secretary</div></div></div>