<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
I don't have experience with Kenlowe, but I assume (and realize there is danger in that word) that these fans are all pretty much the same. That being said the direction, and therefore the flow of the fan can be reversed by switching the wires. For best results
 you may also want to remove the fan blade assembly and turn it around on the shaft since most of the newer fans use a  backward curved blade design for optimum efficiency.</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Bill Lawrence</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
BN1 #554</div>
<div id="appendonsend"></div>
<hr style="display:inline-block;width:98%" tabindex="-1">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt" color="#000000"><b>From:</b> Healeys <healeys-bounces@autox.team.net> on behalf of Larry Wendland via Healeys <healeys@autox.team.net><br>
<b>Sent:</b> Sunday, November 10, 2019 3:02 PM<br>
<b>To:</b> simon.lachlan@alexarevel.plus.com <simon.lachlan@alexarevel.plus.com>; healeys@autox.team.net <healeys@autox.team.net><br>
<b>Subject:</b> Re: [Healeys] Kenlowe</font>
<div> </div>
</div>
<div class="BodyFragment"><font size="2"><span style="font-size:11pt;">
<div class="PlainText">Simon, I Googled Kenlowe and it showed it has a two wire lead.  You can wire it up as you please. Just check the two wires with a volt-ohm meter to see if either one is common to the fan housing. If not, then the motor to the fan is isolated
 from its housing. Should be no issue if it is isolated. <br>
Larry '67 BJ8<br>
<br>
<br>
-----Original Message-----<br>
From: simon.lachlan <simon.lachlan@alexarevel.plus.com><br>
To: 'Healeys' <healeys@autox.team.net><br>
Sent: Sun, Nov 10, 2019 7:38 am<br>
Subject: [Healeys] Kenlowe<br>
<br>
<br>
<br>
Hi Experts,<br>
I have a 3000. It is Negative earth.<br>
I have an opportunity to buy a Kenlowe, second hand, at a very good price. It is Positive earth.<br>
I imagine that, if I reverse the wires, the fan will run the other way. That’s all very well….goes round and round but will, in effect, be pulling the air rather than pushing. Which is useless.<br>
Is there a solution? Apart from not buying it!<br>
Simon<br>
  <br>
<br>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a>
<a href="http://autox.team.net/archive">http://autox.team.net/archive</a><br>
<br>
Healeys@autox.team.net<br>
<a href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com">
http://autox.team.net/mailman/options/healeys/bighealey3k@aim.com</a><br>
<br>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a>
<a href="http://autox.team.net/archive">http://autox.team.net/archive</a><br>
<br>
Healeys@autox.team.net<br>
<a href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/ynotink@msn.com">
http://autox.team.net/mailman/options/healeys/ynotink@msn.com</a><br>
<br>
</div>
</span></font></div>
</body>
</html>