<div style="color:black;font: 10pt arial;">
<div>Here is a quote from Jim Taylor (a well respected SU mechanic):</div>

<div>"An illustration in the AH shop manual shows the float level with a 5/16" bar under the curved portion of the float lever. This setting is appropriate only for the early HS-4 tri-carb series with brass floats. All H & HD series use a 7/16" diameter test bar. The HS series carbs with plastic floats specify 1/8" to 3/16" between the float and the lid in the inverted position."</div>

<div><br>
</div>

<div>Somewhere I have seen a handy diagram illustrating these different configurations & specifications, but of course, I could not find it today. If someone has a copy of this diagram, please post it.</div>

<div><br>
</div>

<div>Gary Hodson</div>
<br>

<div style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original Message-----<br>
From: Mitch Simmons <Dayton21@comcast.net><br>
To: Healeys <Healeys@autox.team.net><br>
Sent: Wed, Aug 28, 2019 12:33 pm<br>
Subject: [Healeys] Hd8 float level<br>
<br>

<div dir="ltr">5/16”  or 7/16”......?<br>
</div>

<div dir="ltr">Can’t remember what to set float fork at<br>
</div>

<div dir="ltr">Thanks<br>
</div>

<div dir="ltr">Mitchell<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr"><br>
</div>
</div>
</div>