<html><head></head><body><div class="yahoo-style-wrap" style="font-family:times new roman, new york, times, serif;font-size:16px;"><div dir="ltr" data-setdir="false">OK, the corrected picture in this email shows where the small arm is supposed to be. Because the shaft below it is "keyed", taking the e-brake handle from the left side of the tunnel to the right side has it angled in the wrong direction. It will not reach the cable clevis this way. Today I took it to a machine shop that specializes in welding. They are going to mill out the two welds holding the shaft in place, turn it 90 degrees and weld it back down. When I decided to make a left side e-brake handle into a right side handle who knew the can of worms it would open. I thought the ratchet plate was all I needed. Everything needed to be flipped in the opposite direction to work. Turns out the Spridget e-brake handle is mounted on the left side of the tunnel. All this because I had it re-chromed already.</div><div dir="ltr" data-setdir="false">Mike MacLean<br></div></div></body></html>