<div dir="auto">I'm sure that would work to some extent Bob but as you would effectively be raising the pivot point of the upper arm rather than moving it inward the actual change would be rather slight and would change the geometry and probably result in an undesirable camber change throughout the suspension travel.<div dir="auto">I would be more inclined to thoroughly investigate the real problem and try to correct that. </div><div dir="auto">One important "datum" point is that the shock mounting surfaces should be level with each other and a specific distance apart which, <span style="font-family:sans-serif">with the shocks removed,</span> is easily checked with a level and straight edge.</div><div dir="auto">My bet is that you will find that one or both of yours slope outward, often caused by drifting into a kerb(s).</div><div dir="auto">We used to have a 6' length of 2" pipe welded to a plate which could be bolted to the shock mount (it also had a hook which engaged under the flange of the X member) and we used this primative device to bend the the X member to the correct position.  </div><div dir="auto">If the shock plates were too close together we could use a jack to move the offending plate outward but of course the engine had to be removed for that.</div><div dir="auto">It was amazing effective.</div><div dir="auto"><br></div><div dir="auto">M</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, May 13, 2019, 6:54 AM Bob Spidell, <<a href="mailto:bspidell@comcast.net">bspidell@comcast.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">My BJ8 has had what I feel is excessive pos. camber--2-3deg--since new <br>
(AFAIK), even with offset trunnion bushings 'maxed out.'  Now that I can <br>
TIG weld with a bit of competence, I've considered adjustable shock <br>
plates but, while browsing the shelves at Harbor Freight the other day I <br>
noticed a box of alignment shims.  These are roughly U-shaped and come <br>
in assorted thicknesses (yeah, I know, they've been around forever). <br>
Anyway, I got to thinking if I put shims under the outer ears on the <br>
front shocks that would tilt the shocks back and remove some or all of <br>
the pos. camber.  My concern is, would this put undue stress on the <br>
ears--where the bolts go--on the shocks, possibly causing them to break <br>
and mayhem to ensue?  Anybody done this?<br>
<br>
<a href="https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&order=EAScore%2Cf%2CEAFeatured+Weight%2Cf%2CSale+Rank%2Cf&q=alignment+shims" rel="noreferrer noreferrer" target="_blank">https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&order=EAScore%2Cf%2CEAFeatured+Weight%2Cf%2CSale+Rank%2Cf&q=alignment+shims</a><br>
<br>
Bob<br>
<br>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <a href="http://autox.team.net/archive" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/archive</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank" rel="noreferrer">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com</a><br>
<br>
</blockquote></div>