<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>The most common fault with the angle drives (once they've failed)
is the short drive is spinning inside the gear drive shaft.They
can be disassembled (very fiddly job) and I solder the cable into
the shaft. If the squared end is rounded off the short cable must
be replaced. Putting a finger load on this may not always reveal
the spinning.. just saying, use pliers to hold ends.. MOMA can
supply you with new short pieces..<br>
</p>
<div class="moz-cite-prefix">On 3/4/2019 3:32 PM, <a class="moz-txt-link-abbreviated" href="mailto:warthodson@aol.com">warthodson@aol.com</a>
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:1519049805.9026605.1551738749686@mail.yahoo.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<font size="2" face="arial" color="black">
<div>Bob, </div>
<div>1. Have you installed the washer that goes between the
angle drive & transmission? See parts book or Moss motors
catalog.</div>
<div>2. According British Car Specialists, if the square section
of the inner cable is too long it will cause binding. Check
their website for tech tips for the specific specifications.</div>
3. Have you tried connecting a drill to the cable while it is
connected to the speedometer to verify that there is no binding
in the cable/speedometer?<br>
<div>Gary Hodson</div>
<div><br>
</div>
<div
style="font-family:arial,helvetica;font-size:10pt;color:black">-----Original
Message-----<br>
From: Robert Begani <a class="moz-txt-link-rfc2396E" href="mailto:rfbegani@gmail.com"><rfbegani@gmail.com></a><br>
To: healeys <a class="moz-txt-link-rfc2396E" href="mailto:healeys@autox.team.net"><healeys@autox.team.net></a><br>
Sent: Mon, Mar 4, 2019 3:35 pm<br>
Subject: [Healeys] speedometer Cable BJ8<br>
<br>
<div id="yiv3751809253">
<style><!-- #yiv3751809253 _filtered #yiv3751809253 {font-family:"Cambria Math";panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv3751809253 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} #yiv3751809253 #yiv3751809253 p.yiv3751809253MsoNormal, #yiv3751809253 li.yiv3751809253MsoNormal, #yiv3751809253 div.yiv3751809253MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:11.0pt;font-family:"Calibri", sans-serif;} #yiv3751809253 a:link, #yiv3751809253 span.yiv3751809253MsoHyperlink {color:#0563C1;text-decoration:underline;} #yiv3751809253 a:visited, #yiv3751809253 span.yiv3751809253MsoHyperlinkFollowed {color:#954F72;text-decoration:underline;} #yiv3751809253 span.yiv3751809253EmailStyle17 {font-family:"Arial", sans-serif;color:windowtext;font-weight:normal;font-style:normal;text-decoration:none none;} #yiv3751809253 .yiv3751809253MsoChpDefault {font-family:"Calibri", sans-serif;} _filtered #yiv3751809253 {margin:1.0in 1.0in 1.0in 1.0in;} #yiv3751809253 div.yiv3751809253WordSection1 {} --></style>
<div>
<div class="yiv3751809253WordSection1">
<div class="yiv3751809253MsoNormal"><span
style="font-size:12.0pt;font-family:"Arial",
sans-serif;">So as part of putting the tunnel and
interior back together so I can go for a ride soon,
I looked at the speedo angle gear. On the old gear
the short cable that fits into the trans had sheared
off, so I installed a new angle gear. Just to see
if that was working I installed the short piece of
cable, turned on the engine, engaged the gear and
looked down and saw the piece of cable spinning.
Then I took out the piece of cable and attached the
speedo cable to the dash. It was not spinning.
Interesting. So I removed the cable from the
housing and fit it into the angle drive gear and no
movement. Thinking it might be a problem of load,
reinstalled the short piece, it spins even when I
apply hand pressure to the end. Looking at the
cable and the housing and the fitting of the cable
up to the stop, etc. cannot figure why it does not
spin. Before I buy a new cable and housing do any
of you have ideas?</span></div>
<div class="yiv3751809253MsoNormal"><span
style="font-size:12.0pt;font-family:"Arial",
sans-serif;"> </span></div>
<div class="yiv3751809253MsoNormal"><span
style="font-size:12.0pt;font-family:"Arial",
sans-serif;">Bob Begani</span></div>
</div>
</div>
</div>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html"
target="_blank" rel="noopener noreferrer"
moz-do-not-send="true">http://www.team.net/donate.html</a><br>
Suggested annual donation $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys"
target="_blank" rel="noopener noreferrer"
moz-do-not-send="true">http://www.team.net/pipermail/healeys
</a><a href="http://autox.team.net/archive" target="_blank"
rel="noopener noreferrer" moz-do-not-send="true">http://autox.team.net/archive</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" rel="noopener
noreferrer" ymailto="mailto:Healeys@autox.team.net"
moz-do-not-send="true">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys"
target="_blank" rel="noopener noreferrer"
moz-do-not-send="true">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a
href="http://autox.team.net/mailman/options/healeys/warthodson@aol.com"
target="_blank" rel="noopener noreferrer"
moz-do-not-send="true">http://autox.team.net/mailman/options/healeys/warthodson@aol.com</a><br>
<br>
</div>
</font>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
Support Team.Net <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Suggested annual donation $12.75
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a> <a class="moz-txt-link-freetext" href="http://autox.team.net/archive">http://autox.team.net/archive</a>
<a class="moz-txt-link-abbreviated" href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a>
<a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a>
Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com">http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com</a>
</pre>
</blockquote>
<pre class="moz-signature" cols="72">--
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World go here: <a class="moz-txt-link-abbreviated" href="http://WWW.PORTERBIKES.COM/">WWW.PORTERBIKES.COM/</a></pre>
<div id="DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br />
<table style="border-top: 1px solid #D3D4DE;">
<tr>
<td style="width: 55px; padding-top: 13px;"><a href="http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank"><img src="https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png" alt="" width="46" height="29" style="width: 46px; height: 29px;" /></a></td>
<td style="width: 470px; padding-top: 12px; color: #41424e; font-size: 13px; font-family: Arial, Helvetica, sans-serif; line-height: 18px;">Virus-free. <a href="http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank" style="color: #4453ea;">www.avg.com</a>
</td>
</tr>
</table><a href="#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1" height="1"> </a></div></body>
</html>