<html><head><style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial, helvetica, sans-serif;}</style></head><body><div>yes---thank you.</div><div><br data-mce-bogus="1"></div><div>tom</div><div><br></div><div>----- Original Message -----<br>From: Bob Spidell <bspidell@comcast.net><br>To: healeys@autox.team.net<br>Sent: Wed, 20 Feb 2019 23:19:47 -0500 (EST)<br>Subject: Re: [Healeys] Clutch and brake pedal issue<br></div><div><br></div><p>Well, did you get a good pedal?</p><p>bs<br></p><div class="moz-cite-prefix">On 2/20/2019 3:09 PM, Tom Felts wrote:<br></div><blockquote cite="mid:1544291114.239471300.1550704150257.JavaMail.zimbra@windstream.net"><div>Please disregard this message below--I have figured it out. <br> I had to bleed the masters first before any fluid would come<br> into them</div><div>tom</div><div><br></div><div>----- Original Message -----<br><div><br></div>From: Tom Felts <a class="moz-txt-link-rfc2396E" href="mailto:tomfelts@windstream.net" target="_blank" data-mce-href="mailto:tomfelts@windstream.net"><tomfelts@windstream.net></a><br><div><br></div>To: <a class="moz-txt-link-abbreviated" href="mailto:healeys@autox.team.net" target="_blank" data-mce-href="mailto:healeys@autox.team.net">healeys@autox.team.net</a><br><div><br></div>Sent: Wed, 20 Feb 2019 17:45:32 -0500 (EST)<br><div><br></div>Subject: Clutch and brake pedal issue<br></div><div><br></div><div>OK---so, I have replaced the clutch master and slave with new<br> units from HS. I have looked at the brake master and it is<br> clean as a pin. All lines to both systems are tight and there<br> is new fluid in the cannister.</div><div><br></div><div>Pumping the brake and clutch pedals as much as I can i can<br> build up no pressure at all in either. I had filled the<br> cannister before starting----and---I see no decrease in fluid<br> level in it after pumping the pedals.</div><div><br></div><div>Is it possible that the cannister is clogged up and won't let<br> fluid get to the masters? Other that that, I'm stumped as to<br> why I can build up no resistance in either system.</div><div><br></div><div>Any thoughts?</div><div><br></div><div>thanks</div><div>tom</div><br></blockquote><div><br></div><div><br></div></body></html>