<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>FWIW, I just noticed the latest edition of Moss's magazine 'Moss
Motoring' has a tech article on wipers. Should be on their
website (mossmotors.com).<br>
</p>
<div class="moz-cite-prefix">On 1/6/2019 5:20 AM, Michael Salter
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAB3i7LJ22kT2ee_fKgBU5g_sdgD7snCWRZjN-e9nyvw1JqdShg@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="auto">Hi Dennis, I've been where you are and worse!!!
<div dir="auto">First thing to do is remove the wiper arms from
the wheel boxes because things can get out of hand very
quickly and you don't want them scratching the bodywork.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Next remove the motor mounting nuts and studs so
that the motor is completely free to move into position on the
end of the tube. It's really easy to cross thread that tube
nut so be sure to run it on with your fingers and only use a
wrench when you are sure it is on straight.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Now work on remounting the motor which may
involve loosening both wheelbox nuts to let the wheelboxes
"float" in their mounting holes.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Good luck, it's one of the most difficult and
uncomfortable jobs on a Healey.</div>
<div dir="auto"><br>
</div>
<div dir="auto">M</div>
<div dir="auto"><br>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr">On Sun, Jan 6, 2019, 4:16 AM Dennis Gavin <<a
href="mailto:djg@gavinassociates.com" moz-do-not-send="true">djg@gavinassociates.com</a>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
<br>
Subject: Wiper motor to wheelbox drive assembly<br>
<br>
I had issues with driver side wiper not sweeping the normal
arch and acting as if it were not engaged with the motor
drive. I eventually got under the dash and could see the tube
that encases the drive cable/gear between the motor and the
driver side wheel box was not located properly. I believe the
flared end of the tube should be captured in the wheelhouse
bracket as the passenger side is installed. It appears the
flare should fit in a groove in the wheelhouse bracket. I
attempted to relocate the tube but had trouble making it
reach. I backed off the tube from the motor end and now have
the tube captured at the wheelbox but can't make the nut reach
the threads on the motor housing. I have attached a pic that
should explain much better. If anybody can steer me on this
I'd really appreciate your efforts. The pic shows the wheelbox
to the left with the tube captured in the bracket. To the
right it shows the nut unable to reach the threads on the
motor assembly.<br>
<br>
Dennis<br>
63 BJ7</blockquote>
</div>
</blockquote>
</body>
</html>