<div dir="ltr"><div class="gmail_default" style="color:#3333ff"><span style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)">The fan motor in my heater worked nicely all summer but naturally chose to crap out once cooler weather arrived a few days ago and I'd like some advice from those 100 drivers who have previously removed/remounted their heaters. </span><br style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)"><br style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)"><span style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)">I have verified that power is getting to the heater lead from the fusebox I installed in the engine compartment, and the green wire disappears into and through the firewall, apparently intact Without disassembling the heater I cannot access the rheostat switch to trace whether it or the motor is the issue and before I pop off the three spring clips that seem to hold the heater faceplate to the rear plate I would like to know that doing so will allow me to get to the heater's innards. </span><br style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)"><br style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)"><span style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)">Also I would appreciate learning whether reassembly is the reverse of disassembly as those clips, esp. the one at the 12:00 o'clock position, do not look like they will be easy to get back into place with the heater mounted to the firewall, which leads me to my last question: How is the heater unit fixed to and removed from the car should I need to access the fan motor? Aside from one screw going through an ell-bracket at the top of the faceplate I see no other fasteners projecting through the firewall.</span><br style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)"><br style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)"><span style="color:rgb(51,51,51);font-family:Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif;font-size:13px;background-color:rgb(250,250,250)">Thanks in advance--Michael Oritt</span><br></div></div>