<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto"><div>Hi Perry,</div><div id="AppleMailSignature">I suspect the mistake you have made is that the calculations indicate the vehicle is stationary. </div><div id="AppleMailSignature">If I use your same calculations for the same column of air (so let's assume the radiator opening is the same size as the fan diameter), but the car is travelling at 60mph:</div><div id="AppleMailSignature">60 mph = 5,280 ft per min, which is also the airspeed velocity of an unladen swallow. </div><div id="AppleMailSignature">So then 3.1416 x .390525 x 5,280 </div><div id="AppleMailSignature">= 6,478 CFM</div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">Which is why you never have an overheating issue at 60 mph (unless you've put an electric fan in front of your radiator, as happened to several competitors at Bathurst)</div><div id="AppleMailSignature"><br></div><div id="AppleMailSignature">I'm not sure what this all proves, but it shows that you only generate 20% as much airflow stationary in your driveway at 3,000 rpm as you do driving at 60 mph. <br><br>Best</div><div id="AppleMailSignature">Chris</div><div><br>On 1 Aug 2018, at 1:58 am, Perry <<a href="mailto:healeyguy@aol.com">healeyguy@aol.com</a>> wrote:<br><br></div><blockquote type="cite"><div><meta http-equiv="Content-Type" content="text/html; charset=utf-8"><meta name="Generator" content="Microsoft Word 15 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
        {font-family:"Cambria Math";
        panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
        {font-family:Calibri;
        panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
        {margin:0in;
        margin-bottom:.0001pt;
        font-size:11.0pt;
        font-family:"Calibri",sans-serif;}
h2
        {mso-style-priority:9;
        mso-style-link:"Heading 2 Char";
        margin-top:2.0pt;
        margin-right:0in;
        margin-bottom:0in;
        margin-left:0in;
        margin-bottom:.0001pt;
        page-break-after:avoid;
        font-size:13.0pt;
        font-family:"Calibri Light",sans-serif;
        color:#2F5496;
        font-weight:normal;}
a:link, span.MsoHyperlink
        {mso-style-priority:99;
        color:blue;
        text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
        {mso-style-priority:99;
        color:#954F72;
        text-decoration:underline;}
span.Heading2Char
        {mso-style-name:"Heading 2 Char";
        mso-style-priority:9;
        mso-style-link:"Heading 2";
        font-family:"Calibri Light",sans-serif;
        color:#2F5496;}
.MsoChpDefault
        {mso-style-type:export-only;}
@page WordSection1
        {size:8.5in 11.0in;
        margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
        {page:WordSection1;}
--></style><div class="WordSection1"><p style="mso-margin-top-alt:0in;margin-right:0in;margin-bottom:7.5pt;margin-left:0in;line-height:22.5pt;background:white"><span style="font-size:16.0pt;font-family:"Times New Roman",serif">OK this has been bothering me off and on for years and I never did anything to try to calculate the Cubic Feet per Minute (CFM) of a stock AH100 radiator fan. In light of the recent discussion of air flow in the engine compartment<o:p></o:p></span></p><p style="mso-margin-top-alt:0in;margin-right:0in;margin-bottom:7.5pt;margin-left:0in;line-height:22.5pt;background:white"><span style="font-size:15.0pt;font-family:"Times New Roman",serif;color:#222222">(Some text borrowed from the net) <o:p></o:p></span></p><p style="mso-margin-top-alt:0in;margin-right:0in;margin-bottom:7.5pt;margin-left:0in;line-height:22.5pt;background:white"><span style="font-size:15.0pt;font-family:"Times New Roman",serif;color:#222222">According to the general fan law for axial fans, you will need to know the fan blade diameter and pitch (blade tilt or attack angle) along with the rpm to calculate CFM. An Austin Healey 100 radiator fan has a four blades with a 15 inch (1.25 foot) diameter and an 4-inch effective pitch (one inch pitch times four blades). This means that each revolution of the running fan blows the 1.25 foot diameter column of air coming passed the fan 4 inches.  There are efficiency losses but we are talking generalities here . For the two ends of the spectrum the engine is idling at 700 rpm or powering along the road at 3000 rpm. The pulley setup on the AH100 is nearly the same diameter on the water pump and crank, so the fan rpm is approximately the same as engine rpm.<o:p></o:p></span></p><div style="margin-bottom:33.75pt;box-sizing: border-box;font-variant-ligatures: normal;font-variant-caps: normal;orphans: 2;text-align:start;widows: 2;-webkit-text-stroke-width: 0px;text-decoration-style: initial;text-decoration-color: initial;word-spacing:0px"><div><div style="margin-bottom:18.75pt;box-sizing: border-box;font-variant-ligatures: none"><p style="mso-margin-top-alt:0in;margin-right:0in;margin-bottom:33.75pt;margin-left:0in;line-height:22.5pt;background:white"><span style="font-size:15.0pt;font-family:"Times New Roman",serif;color:#222222">Calculate the linear velocity of the air through the running fan. If each revolution moves the air 4 inches, then 700-revolutions per minute multiplied by 4 means the air is being moved at 2800 inches per minute, or 233 feet in one minute.  For 3000 rpm engine speed, the answer is 12000 inches or 1000 feet.<o:p></o:p></span></p></div></div></div><div style="margin-bottom:33.75pt;box-sizing: border-box;font-variant-ligatures: normal;font-variant-caps: normal;orphans: 2;text-align:start;widows: 2;-webkit-text-stroke-width: 0px;text-decoration-style: initial;text-decoration-color: initial;word-spacing:0px"><div><div style="margin-bottom:18.75pt;box-sizing: border-box;font-variant-ligatures: none"><p style="mso-margin-top-alt:0in;margin-right:0in;margin-bottom:7.5pt;margin-left:0in;line-height:22.5pt;background:white"><span style="font-size:15.0pt;font-family:"Times New Roman",serif;color:#222222">Calculate the CFM (volumetric flow of air) at 700 rpm. The volume of the column of air described above is pi (3.1416) x fan radius squared (7.5 inches or 0.625 feet squared) times the column length in feet. This would be 3.1416 x 0.390525 square feet x 233 feet = 285 cubic feet per minute at 700 rpm. At 3000 rpm the CFM is 1226. <o:p></o:p></span></p><p style="mso-margin-top-alt:0in;margin-right:0in;margin-bottom:7.5pt;margin-left:0in;line-height:22.5pt;background:white"><span style="font-size:15.0pt;font-family:"Times New Roman",serif;color:#222222">I knew that the stock fans do not move much air but my calculation says it really is horrendous. Suspect my math is off somewhere. Math teachers and mechanical engineers and anybody else for that matter, Comments please.<o:p></o:p></span></p><p style="mso-margin-top-alt:0in;margin-right:0in;margin-bottom:7.5pt;margin-left:0in;line-height:22.5pt;background:white"><span style="font-size:15.0pt;font-family:"Times New Roman",serif;color:#222222">Perry<o:p></o:p></span></p></div></div></div><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal"><span style="font-size:12.0pt;font-family:"Arial",sans-serif;color:#1F497D"><o:p> </o:p></span></p><p class="MsoNormal">To: <o:p></o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal"><o:p> </o:p></p><p class="MsoNormal"><span style="font-size:10.0pt"><o:p> </o:p></span></p></div></div></blockquote><blockquote type="cite"><div><span>_______________________________________________</span><br><span>Support <a href="http://Team.Net">Team.Net</a> <a href="http://www.team.net/donate.html">http://www.team.net/donate.html</a></span><br><span>Suggested annual donation  $12.75</span><br><span></span><br><span>Archive: <a href="http://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a></span><br><span></span><br><span><a href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a></span><br><span><a href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a></span><br><span></span><br><span>Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com">http://autox.team.net/mailman/options/healeys/austin.healey@gmail.com</a></span><br><span></span><br></div></blockquote></body></html>