<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=utf-8" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 9.00.8112.16871">
<STYLE></STYLE>
</HEAD>
<BODY dir=ltr bgColor=#ffffff>
<DIV> </DIV>
<DIV>Earl:  I had been using Vredesteins since since 2003.  During 
that time, I had two negative situations with them.  The first had to do 
with a bad new tire that was causing a pull regardless which side it was 
mounted on.  Looking at the tread, it was not consistently 
straight all the way around the tire.  It was replaced without 
charge.  The second had to do with the last set when one tire developed a 
large bubble on the side wall.  Meanwhile, I replaced all wheels when one 
developed a wobble due to 5 loose and/or broken spokes.  To my surprise, 
the replacement wheels were tubeless design.  About 6,000 miles later, I 
decided to go with the Michelins.  These tires are mounted 
on the tubeless wheels without tubes.  Nobody told me that they had to have 
tubes. ;-(    Now, about 7,000 miles later, the only 
problem I have had was a slow leak on one wheel.  The problem was that the 
valve stem had loosened in the rim.  A tightening of the securing nut on 
the valve stem solved the problem.  A check of all the other wheels 
revealed that all the nuts had loosened slightly and needed a minor tweak to 
tighten them.  So far, so good.  </DIV>
<DIV> </DIV>
<DIV>Now, in addition to local tours between now and September, it's on to 
Rendezvous in Oregon.  The next 1,000-plus miles down - up ? - the 
road.</DIV>
<DIV> </DIV>
<DIV>(The Other) Len<BR>Fairfield, CA, USA<BR>1967 AH 3000 MkIII, 
HBJ8L39031</DIV>
<DIV>        271,388 miles </DIV>
<DIV> </DIV>
<BLOCKQUOTE 
style="BORDER-LEFT: #000000 2px solid; PADDING-LEFT: 5px; PADDING-RIGHT: 0px; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV 
  style="FONT: 10pt arial; BACKGROUND: #e4e4e4; font-color: black"><B>From:</B> 
  <A title=kags@shaw.ca href="mailto:kags@shaw.ca">Earl Kagna</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A title=editorgary@aol.com 
  href="mailto:editorgary@aol.com">editorgary@aol.com</A> ; <A 
  title=healeys@autox.team.net 
  href="mailto:healeys@autox.team.net">healeys@autox.team.net</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, July 09, 2018 8:16 PM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [Healeys] Tires for 
BJ8</DIV>
  <DIV><BR></DIV>
  <DIV dir=ltr>
  <DIV style="FONT-FAMILY: 'Arial'; COLOR: #141100; FONT-SIZE: 12pt">
  <DIV><FONT color=#000000></FONT> </DIV>
  <DIV><FONT color=#000000></FONT> </DIV>
  <DIV>.........  Be aware that all XAS’s  must be run with tubes – 
  it’s just the way they are designed. ....... </DIV>
  <DIV> </DIV></DIV></DIV></BLOCKQUOTE></BODY></HTML>