<div dir="ltr">Thanks for all the replies. Kilmartin makes repair pieces that patch into either the top side or the bottom side of the chassis rails. They make two sizes AH 554 and AH 555. AH 554 is the same width as the chassis rail.  AH 555 is a narrower repair piece that can be inserted into the top or the bottom of a chassis rail. The 1" lip fits inside the chassis rail.<br><br>It turns out I have the narrower piece but it did not appear to me, when I posted this question, that it was narrow enough to fit within the sides. It looks like its gonna be a very tight fit.  <br></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Mar 26, 2018 at 5:50 PM, richard mayor <span dir="ltr"><<a href="mailto:boyracer466@gmail.com" target="_blank">boyracer466@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I bought a length of a Kilmartin frame rail repair piece.  I assumed when I bought it that it was slightly undersized so it would fit between the existing sides. It appears to be slightly narrower then the factory frame rail side but not narrow enough  to fit inside. Can any one out there sheds some light on the best way to deal with this situation?<br></div>
</blockquote></div><br></div>