<font color='black' size='2' face='arial'>
<div>Yes, it did have a filter on the end of the PU line. </div>

<div>Gary</div>

<div> </div>

<div style="color: black; font-family: arial,helvetica; font-size: 10pt;">-----Original Message-----<br>
From: Tom Felts <tomfelts@windstream.net><br>
To: rsimmen <rsimmen@nc.rr.com>; warthodson <warthodson@aol.com>; healeys <healeys@autox.team.net><br>
Sent: Mon, Sep 25, 2017 1:48 pm<br>
Subject: Re: [Healeys] A Mystery<br>
<br>
so it did have a filter over the PU line.  That is what I had and in spite of some who doubted it. it was there---apparently from and as original.<br>
<br>
tom<br>
---- <a href="mailto:warthodson@aol.com">warthodson@aol.com</a> wrote: <br>
<br>
=============<br>
<br>
I cannot find my photos of the filter on the end of the fuel tank pick-up, but as I recall, it was very well secured to the tube & it is unlikely that you could have blown it off. Also, as I recall, if you have an original style fuel pump, it has a check valve built into it which will prevent fuel from flowing backwards thru the pump. You may have damaged this depending on the air pressure you use when you blew backwards thru the pump. This might apply to after market pumps, too.<br>
<br>
<br>
</div>
</font>