<!DOCTYPE html>
<html><head>
    <meta charset="UTF-8">
</head><body><p>When I did a couple of BT7 windshields some years ago the Moss rubber was way too thick.  Even though it is rubber it isn't very compressible.  I measured the thickness of the glass and channel and determined what thickness rubber was required, which I got from Restoration Specialties in Windber, PA.  They have an online catalog, but I think they call it glazing tape.  I put contact cement on the rubber and the windshield to keep the rubber wrapped around while tapping the frame onto the glass.  The new glass wasn't at the same radius as the old frame and one of the windshields broke down the middle after it was in a while due to too much stress on the glass.  Then I had to relieve the radius of the frame a bit to match the replacement glass.<br></p><blockquote type="cite">On May 26, 2017 at 12:28 AM Bob Spidell <bspidell@comcast.net> wrote:<br><br><p>IIRC, the discussion about 'too thick' rubber was for the U-channel seal, but I may not RC.  The glazing rubber we got from Moss years ago seemed to be the correct thickness.  I don't recall using a mallet or much force at all, nor do I recall using any lubrication, but it was a long time ago.</p><p>Did you get the Triplex windshield, or the cheaper one?  There may be some issues with thickness between the two.  We were able to reuse the windshield that came with the car--I spent a day polishing out wiper scratches--and AFAIK it was original, or an OEM replacement.</p><p>Bob<br></p><br><div class="ox-63510548f8-moz-cite-prefix">On 5/25/2017 6:29 PM, Michael MacLean wrote:<br></div><blockquote type="cite">Thanks Bob.  I have the glazing rubber from Moss, but I seem to remember a problem a while ago about the rubber being too thick I hope not.  The only other question I might have is, did you use a rubber mallet? Do you need some kind of lubrication?  It looks to be a tight fit. Once it is on, I won't be able to move laterally if it's too far to the right or left.  Sounds like you have to get ot right the first time.<div id="ox-63510548f8-yMail_cursorElementTracker_1495762141864">Mike<br><div id="ox-63510548f8-yMail_cursorElementTracker_1495762049917"><br clear="none"><blockquote><div style="padding: 10px 0 0 20px; margin: 10px 0 0 0; border-left: 1px solid #6D00F6;" id="ox-63510548f8-yMail_cursorElementTracker_1495761861728"><br clear="none"></div></blockquote></div></div></blockquote><br></blockquote><p><br> </p><blockquote type="cite">_______________________________________________<br>Support Team.Net http://www.team.net/donate.html<br>Suggested annual donation $12.75<br>Archive: http://www.team.net/archive<br>Forums: http://www.team.net/forums<br><br>Healeys@autox.team.net<br>http://autox.team.net/mailman/listinfo/healeys<br><br>Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/mgcharlie@comcast.net<br><br></blockquote></body></html>