<div dir="ltr">Hi, If anyone is still out there.<div>I got the caliper apart and cleaned (thanks all) and now I'm having trouble getting the pistons in with the dust covers.</div><div>I can get the piston in or I can get the dust cover seated in its slot in the cylender.  I can't get both.</div><div>If I put the piston in first I can't get the cover into its slot.  If I put the cover in first I can't keep it in position and while installing the piston.</div><div>I know I've done this back in the day and I don't remember having any problem (or maybe I just said "Screw It!" and only fit the cover to the piston).</div><div>Cheers,</div><div>Mike Tobin,</div><div>Townsend, Montana</div></div>