<div dir="ltr"><div><div><div>I lost my 63 BJ7 to a whole house fire a number of months back.  I owned my BJ7 for over 30 years.  I restored the car and it was beautiful.  There was nothing I would not undertake on the car.<br><br>I have replaced my 63 BJ7 with a 66 BJ8.  I do love the "new" car.  There are differences between the cars and that is what I need help with.  I need to clean the overdrive operating valve and then adjust the overdrive solenoid for proper operation.<br><br></div>My question is how do I remove the center console?  I see the two screws on each side of the top of the console where it joins the dash but there is more to removing it. Where are there other screws/attachment points?  Are there disconnects for the switches or do I just made a sketch of the wiring before I disconnect them?<br><br></div>I received just the ignition key when I bought the car.  Is the ignition key supposed to operate the glove box and trunk?  My key does not operate any of the.  If not, I do not see numbers on the locks themselves so how and where do I get replacement keys.  I also assume there is a separate key for the doors and I do not see a number on that lock either.<br></div><div><div><div><div><div><br></div><div>What other important differences between the cars that I should be aware of?<br><br></div><div>The list has been great with information and help in the past.<br><br></div><div>Thanks to all who reply.<br><br></div><div>Fred<br><br></div><div>63 BJ7 (deceased)<br></div><div>66 BJ8<br></div></div></div></div></div></div>