<div dir="ltr"><div><div><div>List, <br></div>Many years ago I purchased a lightened
flywheel from Bolt On Healeys. I never installed it, but now I think I'm
going to. The flywheel I bought was for an early 3000. Now I'd like to
put a later clutch instead of the 3 finger style clutch. Can I modify
the older flywheel to be able to use the later style diaphragm pressure
plate? I think I should be able to thread bolts into the existing bolt
holes then have the head machined flush. Then have new bolt holes
drilled and tapped. Has anyone done this, or I would appreciate any
suggestions.<br></div><div>Or if Bill Bolton is still out there and
offering lightened flywheels that will take the 9 1/2" pressure plate, I
might do that. I haven't been able to locate him on line.<br><br></div>Thanks, <br></div>Mark Fawcett<br></div>