<div dir="ltr"><div>Andy,<br><br></div>Can you post a photo of your G clamp?<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Jan 27, 2016 at 8:44 PM, Bob Spidell <span dir="ltr"><<a href="mailto:bspidell@comcast.net" target="_blank">bspidell@comcast.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Clever!<br>
<br>
Better get a patent (quick).<br>
<br>
Bob<br>
<br>
On 1/27/2016 3:40 PM, Andy Thorp wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Thanks to everyone who replied with pics and ideas for this job.<br>
<br>
I ended up modifying a G clamp similar to one somebody sent pics of and it worked very well. It was a bit clumsy to use but once I got the hang of getting the metal clamped up fully first it was relatively straightforward. The important features are having about 1 1/4" narrow rod that goes up inside the shroud lip and the same coming down from the top and fixed so it can't rotate. The RHS was a bit overkill in hindsight.<br>
<br>
The rivets I had were 1/4" long A125F0250A from <a href="http://rivetsonline.com" rel="noreferrer" target="_blank">rivetsonline.com</a> and if I were to do the job again I'd probably go with 3/8" long given that some of the rivet gets squashed into the [now] slightly oversize holes. The amount of force required to set the rivets is no more than is required to tighten up a G clamp firmly on a piece of metal so it isn't really much effort once the tool is made.<br>
<br>
Next job, painting.<br>
<br>
Cheers,<br>
Andy.<br>
<br>
<br>
</blockquote>
<br>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
Archive: <a href="http://www.team.net/archive" rel="noreferrer" target="_blank">http://www.team.net/archive</a><br>
Forums: <a href="http://www.team.net/forums" rel="noreferrer" target="_blank">http://www.team.net/forums</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com</a><br>
<br>
</blockquote></div><br></div>