<html>
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Rick is quite right, and flat top pistons level with the top of the
block was the way it was done years ago for racing, very problematic
with modern fuels in a road car. The semi dished 100M style piston
works well and give a bit over 9 to 1 compression.<br>
Cheers<br>
Larry Varley<br>
<br>
<br>
<div class="moz-cite-prefix">On 16/01/2016 3:04 PM, Keith Taylor
wrote:<br>
</div>
<blockquote
cite="mid:CAJBOvRS_06TkgTxzLg1L1arwe5VXDn6EAixxwHpAts_PUU68TQ@mail.gmail.com"
type="cite">
<div dir="ltr">
<div>Thanks Bob & Rick I believe the pistons were from a
Dodge "Q" & are not dished, they are level with the top of
the block</div>
<div>They were fitted long before I bought the car & after
rebuild I had to fit a high torque starter to get it to
turnover </div>
<div>From your assessments & my assumptions I thought
compression would be higher than 9.5 possibly 10+</div>
<div>The car certainly has plenty of torque It also had an
ugly/bizarre plumbing setup to the head similar to a 100S for
cooling </div>
<div><br>
</div>
<div>Curiosity satisfied </div>
<div><br>
</div>
<div>Keith</div>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">On 16 January 2016 at 12:57, Wilko2 <span
dir="ltr"><<a moz-do-not-send="true"
href="mailto:e-wilkins@cox.net" target="_blank">e-wilkins@cox.net</a>></span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">The
standard 7.5/1 piston has a dish top with a volume of 29 cc.<br>
<br>
The LeMans 8.5/1 piston also has a dish top but the dish is
not as deep being only 14cc volume. A true flat top if it
has the same compression height (distance from the top of
the pin hole to top of piston) would give a ratio of 10.5/1.
There could be design variations that are flat top but have
a lower compression height which would give a lower ratio.<br>
<br>
Without knowing where the top of your piston is in relation
to the top of the cylinder or dimension from pin, there's
not way of knowing without measuring your chambers.<br>
<br>
Rick Wilkins<br>
<div>
<div class="h5"><br>
On Jan 15, 2016, at 5:10 PM, Keith Taylor wrote:<br>
<br>
> What would be the compression ratio of a BN2
fitted with flat top pistons.<br>
><br>
> Keith Taylor<br>
> BN1<br>
> BN2<br>
><br>
> Southern Highlands OZ<br>
</div>
</div>
<span>> _______________________________________________<br>
> Support Team.Net <a moz-do-not-send="true"
href="http://www.team.net/donate.html" target="_blank"
rel="noreferrer">http://www.team.net/donate.html</a><br>
> Suggested annual donation $12.75<br>
> Archive: <a moz-do-not-send="true"
href="http://www.team.net/archive" target="_blank"
rel="noreferrer">http://www.team.net/archive</a><br>
> Forums: <a moz-do-not-send="true"
href="http://www.team.net/forums" target="_blank"
rel="noreferrer">http://www.team.net/forums</a><br>
><br>
> <a moz-do-not-send="true"
href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a><br>
> <a moz-do-not-send="true"
href="http://autox.team.net/mailman/listinfo/healeys"
target="_blank" rel="noreferrer">http://autox.team.net/mailman/listinfo/healeys</a><br>
><br>
</span>> Unsubscribe/Manage: <a moz-do-not-send="true"
href="http://autox.team.net/mailman/options/healeys/e-wilkins@cox.net"
target="_blank" rel="noreferrer">http://autox.team.net/mailman/options/healeys/e-wilkins@cox.net</a><br>
><br>
<br>
</blockquote>
</div>
<br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Support Team.Net <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Suggested annual donation $12.75
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/archive">http://www.team.net/archive</a>
Forums: <a class="moz-txt-link-freetext" href="http://www.team.net/forums">http://www.team.net/forums</a>
<a class="moz-txt-link-abbreviated" href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a>
<a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a>
Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/healeys/varley@cosmos.net.au">http://autox.team.net/mailman/options/healeys/varley@cosmos.net.au</a>
</pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<p class="" avgcert""="" color="#000000" align="left">No virus
found in this message.<br>
Checked by AVG - <a moz-do-not-send="true"
href="http://www.avg.com">www.avg.com</a><br>
Version: 2016.0.7294 / Virus Database: 4489/11412 - Release
Date: 01/16/16</p>
</blockquote>
<br>
</body>
</html>