<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=US-ASCII" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 11.00.9600.17631"></HEAD>
<BODY id=role_body style="FONT-SIZE: 12pt; FONT-FAMILY: Arial; COLOR: #000000"
bottomMargin=7 leftMargin=7 rightMargin=7 topMargin=7><FONT id=role_document
color=#000000 size=3 face=Arial>
<DIV>The cork in the toolkit's Tecalemit No 3020 grease gun needs to be
replaced.</DIV>
<DIV> </DIV>
<DIV>It does not look like a big deal: unscrew the lower spring off the
plunger shaft, deburr the shaft to allow the removal of the two washers and
what is left of the cork. </DIV>
<DIV> </DIV>
<DIV>Drill a hole in a fairly closely sized new cork with Dremel tool.
Reassemble. I have not found appropriately sized corks with holes as
yet. </DIV>
<DIV> </DIV>
<DIV>It may be better to Key the retaining washers with a Dremel tool, leaving
the original burrs on the shaft.</DIV>
<DIV> </DIV>
<DIV>This is pretty trivial, but if anyone has any insights, they would be
appreciated.</DIV>
<DIV> </DIV>
<DIV>Best Regards,</DIV>
<DIV> </DIV>
<DIV>Bill</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV></FONT></BODY></HTML>