<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>I have seen a hub where the bearing had worn itself down into the hub about 1/8" and was a sloppy fit around the exterior as well. I believe this happened because the distance piece was left out but this is only a guess. <br><br>Richard Mayor<br><br><br><div>> From: healeymanjim@hansencc.net<br>> To: healeys@autox.team.net<br>> Date: Fri, 30 Jan 2015 19:32:25 -0800<br>> Subject: [Healeys] spun bearings<br>> <br>> I have changed many seals and have always had to drive out the bearing with a brass drift and drive it back in. cannot imagine it spinning inside, but I have been wrong many times.<br>> _______________________________________________<br>> Support Team.Net http://www.team.net/donate.html<br>> Suggested annual donation $12.75<br>> Archive: http://www.team.net/archive<br>> Forums: http://www.team.net/forums<br>> <br>> Healeys@autox.team.net<br>> http://autox.team.net/mailman/listinfo/healeys<br>> <br>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/mayorrichard@hotmail.com<br>> <br></div> </div></body>
</html>