<font color='black' size='2' face='arial'>
<div><font face="Arial, Helvetica, sans-serif" style="background-color: transparent;">Steve, </font></div>

<div>Thanks for the follow-up data.</div>

<div>If the clearance between the bearing spacer & the face of the bearing carrier, less the gasket & O-ring, is .004" then you were within spec without any gasket. By adding a .005" thick gasket the bearing spacer would be<font color="firebrick"> <strong>-</strong>.001"</font> below the gasket surface & therefore not within spec. The thickest gasket you could use & still be within spec. is .003". The intent was to have a small amount of preload on the bearing spacer to prevent movement of the bearing. I am not saying your setup will not work. I am just trying to be clear on what the factory workshop manual intended. </div>

<div>Gary Hodson  </div>

<div> </div>

<div> </div>

<div style="color: black; font-family: arial,helvetica; font-size: 10pt;">From: Steve Gerow <a href="mailto:steveg@abrazosdata.com">steveg@abrazosdata.com</a><br>




<div id="AOLMsgPart_2_1686f779-1cd9-493e-82ce-7073cfe3d640">
<style scoped="">#AOLMsgPart_2_1686f779-1cd9-493e-82ce-7073cfe3d640 td{color: black;} @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4;} @font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4;} .aolReplacedBody p.MsoNormal,.aolReplacedBody li.MsoNormal,.aolReplacedBody div.MsoNormal {margin:0in; margin-bottom:.0001pt; font-size:11.0pt; font-family:"Calibri","sans-serif";} .aolReplacedBody a:link,.aolReplacedBody span.MsoHyperlink {mso-style-priority:99; color:blue; text-decoration:underline;} .aolReplacedBody a:visited,.aolReplacedBody span.MsoHyperlinkFollowed {mso-style-priority:99; color:purple; text-decoration:underline;} .aolReplacedBody span.EmailStyle17 {mso-style-type:personal-compose; font-family:"Calibri","sans-serif"; color:windowtext;} .aolReplacedBody .MsoChpDefault {mso-style-type:export-only;} @page WordSection1 {size:8.5in 11.0in; margin:1.0in 1.0in 1.0in 1.0in;} .aolReplacedBody div.WordSection1 {page:WordSection1;}</style>

<div class="aolReplacedBody" lang="EN-US">
 
<div class="WordSection1">
  
<div class="MsoNormal">I measured my rear hub clearance today at .004” between the bearing spacer and the face of the bearing carrier – sans paper gasket and o-ring.</div>

  
<div class="MsoNormal">Therefore I made a gasket out of .005” envelope paper and installed it with a light partial coat of hylomar.</div>

  
<div class="MsoNormal"> </div>

  
<div class="MsoNormal">See: <a href="http://www.pbase.com/image/158968947" target="_blank">http://www.pbase.com/image/158968947</a> and the succeeding image.</div>

  
<div class="MsoNormal"> </div>

  
<div class="MsoNormal">My new Moss gasket had compressed <font size="2">from</font> .014” to .010” – leaving the bearing spacer loose by .006”.<br>
<br>
</div>

 </div>

</div>

</div>




</div>
</font>