[Healeys] Seeking List Wisdom

JSARCH jmsdarch at sbcglobal.net
Thu Sep 17 13:52:38 MDT 2026


Bob, I don’t recall the exact pressure but it was good after I replaced the piston and housing. However, I got to thinking, can you hear the solenoid engage? Have you gone through the OD trouble shooting list?

 

JS

 

From: Bob Spidell <bspidell at comcast.net> 
Sent: Thursday, September 17, 2026 12:04 PM
To: JSARCH <jmsdarch at sbcglobal.net>; 'Healeys' <healeys at autox.team.net>
Subject: Re: [Healeys] Seeking List Wisdom

 

Thanks, John. Something to consider, but I replaced the accumulator cylinder, piston and spring with DWM 'uprated' parts when I overhauled it (only a few thousand miles ago). My hydraulic pressure has been consistent and steady--on- and off-idle--but on the low side. Do you know what your pressure was? 

Anyone else running the DWM gear?

bs




On 9/17/2026 11:52 AM, JSARCH wrote:

I had a problem where my OD would engage but would stop working after it heated up. It turned out to be a problem with the accumulator piston assembly not holding pressure. The piston, rings and housing can be removed in situ using a small piston ring expander to grip against the inside walls of the housing.



John,

'62 BT7

 

-----Original Message-----
From: Healeys  <mailto:healeys-bounces at autox.team.net> <healeys-bounces at autox.team.net> On Behalf Of Bob Spidell via Healeys
Sent: Thursday, September 17, 2026 9:14 AM
To: Healeys  <mailto:healeys at autox.team.net> <healeys at autox.team.net>
Subject: [Healeys] Seeking List Wisdom

 

I've had an intermittent issue with my BJ8 O/D. It doesn't engage reliably, but does maybe 1 out of 10 attempts. I think I've ruled out electrical issues, as the solenoid activates reliably. I checked the hydraulic pressure, it's just under 400 PSI. I know that's low per the shop manual (470-490), but it has worked reliably for years and had the same pressure after an overhaul.

 

Q1: Any ideas why it has stopped engaging after years and thousands of miles?

 

Q2: If it's the pump, can these be changed out in situ?

 

TIA,

Bob

_______________________________________________

Support Team.Net  <http://www.team.net/donate.html> http://www.team.net/donate.html Suggested annual donation  $12.75

 

Archive:  <http://www.team.net/pipermail/healeys> http://www.team.net/pipermail/healeys  <http://autox.team.net/archive/healeys> http://autox.team.net/archive/healeys

 

 <mailto:Healeys at autox.team.net> Healeys at autox.team.net

 <http://autox.team.net/mailman/listinfo/healeys> http://autox.team.net/mailman/listinfo/healeys

 

Unsubscribe/Manage:  <http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net> http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20260917/f72939c9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 6589 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20260917/f72939c9/attachment.jpg>


More information about the Healeys mailing list