[Healeys] Replacing coil springs

Sun Oct 25 16:53:49 MDT 2026

Yes, here you are. Thanks for looking into this for me.

Simon

From: Michael Oritt <michael.oritt at gmail.com> 
Sent: 25 October 2026 19:11
To: simon.lachlan at alexarevel.plus.com
Cc: Healey List <healeys at autox.team.net>
Subject: Re: [Healeys] Replacing coil springs

Simon--

Can you please post a couple of pics that illustrate what you describe in this part of your last post:  

"With a lot of effort/brute force and ignorance I have managed to replace the rearmost pair. 

But the various layers simply won’t quite line up for the two nearest the engine. 

A couple of mm, but that’s all it takes to prevent that 3/8” bolt lining up and going through."

I’ve tried every combination that I can think of….loosening some/tightening others…up/down..whatever. That elusive couple of mm."

Thank--Michael Oritt

On Sun, Oct 25, 2026 at 12:31 PM Simon Lachlan via Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net> > wrote:

MkII BT7 3000.

So, my files show that I enquired about this back in October 1999 and that I received sound advice that enabled me to remove and replace my car’s front springs.

I discovered, too late, that coil compressors wouldn’t fit and I used 4, for safety’s sake, 6” lengths of threaded rod. This worked well.

So…..the other day, I removed my car’s front rhs spring. No trouble…slowly, slowly catchee monkey.

But, I’m having a helluva job getting the spring back on. As so often, per the book, replacing is not the reverse of removing. With a lot of effort/brute force and ignorance I have managed to replace the rearmost pair. But the various layers simply won’t quite line up for the two nearest the engine. A couple of mm, but that’s all it takes to prevent that 3/8” bolt lining up and going through.

I’ve tried every combination that I can think of….loosening some/tightening others…up/down..whatever. That elusive couple of mm.

I seem to be missing the point somewhere. Can you guys think of what I’m doing wrong or what I may have forgotten?? Any advice would be more than welcome….

I have ordered four 12” lengths of 3/8” threaded rod and the appropriate bolts. I hope I may be able to line them up that way ie starting from a lower point and going up from there.

Another question….the car is going in to a garage in a couple of weeks. My question is this…would it be safe enough to drive the car with two of its proper bolts in the rear two holes and two lengths of 7.98mm in the front two?? Yes, I would take it slow.

I’m rapidly running out of patience and energy with this. Not an easy one without a hoist. Lying on one’s (aged & sore) back whilst fighting with a bolshie coil spring is depressing and, seemingly, fruitless.

Any ideas re the two questions, above??

Thanks, Simo n

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net <mailto:Healeys at autox.team.net> 
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20261025/15287716/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1892.JPG
Type: image/jpeg
Size: 514571 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20261025/15287716/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1896.JPG
Type: image/jpeg
Size: 491693 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20261025/15287716/attachment-0001.jpe>