[Healeys] oil drip

[Michael Salter]

In case it helps the hex is 1/2" AF.


________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Richard Antal via Healeys <healeys at autox.team.net>
Sent: Thursday, 11 June 2026 15:32:00
To: healeys at autox.team.net <healeys at autox.team.net>; jim <ab7vf at yahoo.com>
Subject: Re: [Healeys] oil drip

the problem is that even though i can get a wrench onto the nut, you can't turn it because various obstacle prevent rotation of the wrench arm.....rich antal

On Thursday, June 11, 2026 at 03:21:06 PM EDT, jim <ab7vf at yahoo.com> wrote:


Something like this might work

On Wednesday, June 10, 2026 at 11:35:14 PM PDT, Richard Antal via Healeys <healeys at autox.team.net> wrote:


All,
My last question regarding the leak from the oil pressure gauge: What is the correct size of the box wrench I would need to follow the advice that Michael Oritt had suggested on a prior posting? Thanks as always.....rich antal
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ab7vf@yahoo.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20260611/2826bb6a/attachment.htm>