[Healeys] Locking Crank

[simon.lachlan at alexarevel.plus.com]

If(!) my memory t serves me right, you can take the sump off and jam it with a piece of wood.

Otherwise, maybe get something to lock the flywheel. Per attached. I used this for work on the clutch but should do the job?

Years ago, I put a massive spanner on the nut and clouted it with a big hammer. Yes, the crank moved but the nut surely tightened up. It is an absolute beast of a spanner…open-ended, just one end. Heavy as anything, looks like something out of a Challenger tank’s toolkit.

Have fun. Simon

 

 

From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Roger Grace
Sent: 08 April 2026 16:05
To: Healeys <healeys at autox.team.net>
Subject: [Healeys] Locking Crank

 

Had a bit of a mishap with my BJ8 engine that is installed in the car.

Drive shaft and gearbox in place and tunnel off.

Need to re-tighten the crank nut.

So how is the easiest way to lock the crank ?

Is it safe (no damage) to lock the prop shaft flange and in 4th gear ?

Thank you

rg

 


 <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> 

Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> www.avg.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20260408/2d168cae/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ~WRD0000.jpg
Type: image/jpeg
Size: 823 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20260408/2d168cae/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Flywheel Holding Tool 2.JPG
Type: image/jpeg
Size: 824414 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20260408/2d168cae/attachment-0002.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Flywheel Holding Tool 3.JPG
Type: image/jpeg
Size: 4079416 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20260408/2d168cae/attachment-0003.jpe>