[Healeys] Pre -lube BJ8 engine that has been in storage

[Michael Oritt]

Prime the oil pump by injecting oil by removing the oil pressure gauge line
at the block.
If you have an original canister oil filter fill it before starting.

On Sun, Jul 6, 2025 at 2:23 PM Hank Leach via Healeys <
healeys at autox.team.net> wrote:

> Mitch- buy an aerosol can of Stabil fogging oil. Hank
> --------------------
>
> From: "Mitch Simmons via Healeys" <healeys at autox.team.net>
> Reply-To: "Mitch Simmons" <simmonsmitch23 at gmail.com>
> To: <healeys at autox.team.net>
> Sent: July 6, 2025 at 2:58 AM PDT
> Subject: [Healeys] Pre -lube BJ8 engine that has been in storage
> Hello,
>
> I am trying to find the info. for using ......a paint pressure pot to pump
> oil into the engine (at low air pressure) to pre-lube engine before
> starting.  Any help will be greatly appreciated
>
> Thanks
> Mitchell
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250706/3b2c8df0/attachment.htm>