[Healeys] (no subject)

[Bob Haskell]

Jim,

Not sure which model you have.  For the 3000 gas tank, it's 1/4-19 tpi 
British Standard Parallel Pipe thread.  The OD of the gas tank fitting 
is 0.518".

Cheers,

Bob Haskell
Austin-Healey 3000 roadster registrar

On 2/27/25 22:55, m.g.sharp at sympatico.ca wrote:
>
> I can’t say for sure and don’t have one to measure, but it is probably 
> a BSPP thread.
>
> Mirek
>
> *From:*Healeys <healeys-bounces at autox.team.net> *On Behalf Of *Jim Cox
> *Sent:* February 27, 2025 10:40 PM
> *To:* healeys at autox.team.net
> *Subject:* [Healeys] (no subject)
>
> Would anyone have the thread dimensions for the female nut attaching 
> the steel fuel line to the fuel tank. Appears to be an original tank. 
> The fitting won't tighten and the nut is stripped.
>
> The pipe running from the tank to the fuel pump isn't sold separately 
> so I am going to make one.
>
> Of course if anyone has a spare available,  let me know. Thanks , Jim
>
>
> _______________________________________________
> Support Team.Nethttp://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive:http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20250228/312d6d47/attachment.htm>