[Healeys] New OD plug

[John Spaur]

The picture does not show the O-ring and neither does the description. Is there another part number? John

 



 

From: fsufan1952 at yahoo.com [mailto:fsufan1952 at yahoo.com] 
Sent: Tuesday, October 8, 2024 11:33 AM
To: John Spaur <jmsdarch at sbcglobal.net>
Cc: Bob Haskell <rchaskell at earthlink.net>; healey list <healeys at autox.team.net>
Subject: Re: [Healeys] New OD plug

 

The AHSPARES part number is OVD174

It is brass like the original one and it is a little thicker like a 1/16 more 

          Don 

Sent from my iPhone





On Oct 8, 2024, at 12:56 PM, John Spaur <jmsdarch at sbcglobal.net <mailto:jmsdarch at sbcglobal.net> > wrote:



Lubrication is commonly applied to O-rings to prevent grabbing and ease installation. It might be possible to use a fat O-ring on the plug without machining a grove, but I am very uncertain about that. This is a picture from sprinkler manifold. 

<image003.png>

-----Original Message-----
From: Bob Haskell [mailto:rchaskell at earthlink.net] 
Sent: Tuesday, October 8, 2024 3:13 AM
To: JSARCH <jmsdarch at sbcglobal.net <mailto:jmsdarch at sbcglobal.net> >; fsufan1952 at yahoo.com <mailto:fsufan1952 at yahoo.com> ; 'healey list' <healeys at autox.team.net <mailto:healeys at autox.team.net> >
Subject: Re: [Healeys] New OD plug

 

The gasket might prevent the o-ring from grabbing as the plug is tightened.

 

Don, can you tell if the new one is the same material as the original? Are the flanges the same thickness?  I wonder if machining a groove in an original one would weaken it too much. Would think so.

 

Bob Haskell

Austin-Healey 3000 roadster registrar

 

On 10/8/24 02:19, JSARCH via Healeys wrote:

> I would thing the gasket would not be needed because of the O ring.

> 

> -----Original Message-----

> From: Healeys < <mailto:healeys-bounces at autox.team.net> healeys-bounces at autox.team.net> On Behalf Of Don via 

> Healeys

> Sent: Monday, October 7, 2024 7:16 PM

> To: healey list < <mailto:healeys at autox.team.net> healeys at autox.team.net>

> Subject: [Healeys] New OD plug

> 

> After removing the brass OD  drain plug on the 67 BJ8 , very badly 

> leaking and ordering a replacement one from AHSpares. New design from 

> AHSPARES looks like it may work . Rather than flat surface to flat 

> surface with a washer and gasket compound the new design has a groove 

> with a supplied rubber o ring then the gasket .

> 

> _______________________________________________

> Support Team.Net  <http://www.team.net/donate.html> http://www.team.net/donate.html Suggested annual 

> donation  $12.75

> 

> Archive:  <http://www.team.net/pipermail/healeys> http://www.team.net/pipermail/healeys 

>  <http://autox.team.net/archive/healeys> http://autox.team.net/archive/healeys

> 

>  <mailto:Healeys at autox.team.net> Healeys at autox.team.net

>  <http://autox.team.net/mailman/listinfo/healeys> http://autox.team.net/mailman/listinfo/healeys

> 

> Unsubscribe/Manage: 

>  <http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net

> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20241008/40b745e4/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 62015 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20241008/40b745e4/attachment.png>