[Healeys] inner A arm bushing nuts

[Mike Sinclair]

Speaking of blue threadlocker, I recently had the outside of a flash 
drive come off.  A drop of blue and reassemble, and it's fine.  I'm so 
techy!

Mike

On 11/23/24 9:22 PM, Bob Spidell via Healeys wrote:
> Try blue threadlocker and report back.
>
>
> On 11/23/2024 5:09 PM, goldengt at cal.net wrote:
>> I found my inner A arm bushing lock nuts all loose today. These are 
>> Moss parts. Nylock nuts are not appropriate for those nuts. I should 
>> have used my old pins that have castellated nuts and cotter pins. I 
>> think if one keeps the Nylock nuts, they should be tightened at every 
>> lubrication interval. This is after 20000 miles.
>> Ken Freese
>> 65 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys 
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/phoenix722@comcast.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20241124/95245ab0/attachment.htm>