[Healeys] Isky cam

[Richard Collins]

I have one in my BN7; let me see if I can find the numbers
Regards,
Richard C


> On Mar 12, 2024, at 22:02, Richard Mayor via Healeys <healeys at autox.team.net> wrote:
> 
> The most likely Isky grind that you got was the T36. It was advertised as the 3/4 race grind.  The full race was called the Isky T46 and was not recommended for a street car.  If I recall correctly the lash was a bit looser. But, you should be fine just using the stock valve lash numbers.
> 
> 
> Richard Mayor
> boyracer466 at gmail.com
> 
> 
>> On Mar 12, 2024, at 2:52 PM, i erbs <eyera3000 at gmail.com> wrote:
>> 
>> Hello all,
>> We are inching towards driving season here in NW Oregon.
>> When I built my engine in 1975 I had Ed Iskadarian cut me a hotter street cam for my BT7 engine. I of course lost the info card. Is there any way to determine the valve lash? Or should I use OEM and leave it alone?
>> Is there any way without removing it to figure out the grind?
>> Thanks in advance for any help.
>> Ira.
>> 
>> Ira Erbs
>> Milwaukie, OR
>> 1959 Austin Healey 100-6
>> 
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> 
>> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
>> 
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>> 
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/gonnagitcha90@hotmail.com
>