[Healeys] trunk lid rubber buffers

[Mark Donaldson]

The three button buffers on the tri-carb are 14mm x 3mm.

 

On my BN2 they are slightly wider - 15mm  . . .  and looking a bit worse for
wear after 67 years.  I must replace them.

 

In Imperial measurement, let's say 9/16" x 1/8"    

 

I didn't pull one out to check the diameter of the spear.

 

Mark

Ardmore

NZ

 

 

 

-----Original Message-----
From: Goldengt at cal.net <Goldengt at cal.net> 
Sent: Tuesday, 26 September 2023 12:48 PM
To: healeys at autox.team.net
Subject: [Healeys] trunk lid rubber buffers

 

What is the size for the three rubber buffers for the boot lid? I have a bag
of about 50 and wonder if they are correct for that application.

The painter put some on that are way too large in diameter.

Thanks,

Ken Freese

65 BJ8

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230927/87ec0de8/attachment.htm>