[Healeys] 3000 Boot Emblem

[Mike Sinclair]

Ouch!

On 10/1/23 1:38 PM, Patrick and Caroline Quinn wrote:
>
> Hello
>
> Yes have done recently with success.
>
> Place the badge in hot to boiling water, take it out and while the 
> badge is still hot bend by hand to the desired curve.
>
> Hoo Roo
>
> Patrick Quinn
>
> Blue Mountains, Australia
>
> *From:*Healeys <healeys-bounces at autox.team.net> *On Behalf Of *Harold 
> Manifold
> *Sent:* Monday, October 2, 2023 4:14 AM
> *To:* Healey List <healeys at autox.team.net>
> *Subject:* [Healeys] 3000 Boot Emblem
>
> The original "3000" boot emblem was heavily pitted and I purchased a 
> new one from AH Spares. The new emblem looks good but doesn't have a 
> curve to fit tight to the boot. See picture. I have seen another car 
> with the same issue. Has anyone successfully curved this emblem? The 
> casting is probably a type of pot metal and may not like being stressed.
>
> Thanks... Harold
>
>
> _______________________________________________
> Support Team.Nethttp://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive:http://www.team.net/pipermail/healeys  http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/phoenix722@comcast.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20231001/f6d2f9fd/attachment.htm>