[Healeys] Exhaust hangers

[Michael Salter]

BSF   well one learns something every day.
Thanks Curt.

M

On Tue., May 23, 2023, 11:07 a.m. Curtis Arndt, <cnaarndt at gmail.com> wrote:

> *<To be correct the "U" clamp should have UNF threads.   Just sayin'>*
>
> Michael, FWIW, both of my ORIGINAL "U" shaped clamps have BSF fasteners...
> See photos. I reused one of my originals when I restored my BN1. Modern
> reproduction "U" clamps use UNF or more commonly UNC fasteners.
>
> On Mon, May 22, 2023 at 7:33 PM Michael Salter <michaelsalter at gmail.com>
> wrote:
>
>> The strut attaches to an extra length oil pan screw, the one directly
>> below the spot where the tach cable attaches to the tach drive housing.
>> To be correct the "U" clamp should have UNF threads.   Just sayin'
>>
>> M
>>
>> On Mon., May 22, 2023, 5:47 p.m. Michael MacLean via Healeys, <
>> healeys at autox.team.net> wrote:
>>
>>> Excuse my ignorance, but can someone tell me what number 8 is bolted to
>>> and where does it clamp to the exhaust pipe? Anyone have a picture of this
>>> hanger in place?  I am ordering all the hangers for the exhaust system to
>>> install before I take the car off the jack stands.
>>> Mike MacLean
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230523/aed6e3da/attachment.htm>