[Healeys] Exhaust hangers

[Curtis Arndt]

What Hank says is correct. To expand....

That hex screw [fully threaded] is a BSF 1/4" X 26 tpi Whitworth type. I
don't know the length off hand, but will look it up.

Cheers,

Curt

On Mon, May 22, 2023 at 6:15 PM Hank Leach via Healeys <
healeys at autox.team.net> wrote:

> Michael-that goes to the one long bolt that secures the sump pan.  There
> is only one long one all the others are of shorter but equal length. Hank
>
> -----------------------------------------
> From: "Michael MacLean via Healeys"
> To: "Ahealey help"
> Cc:
> Sent: Monday May 22 2023 3:01:20PM
> Subject: [Healeys] Exhaust hangers
>
> Excuse my ignorance, but can someone tell me what number 8 is bolted to
> and where does it clamp to the exhaust pipe? Anyone have a picture of this
> hanger in place?  I am ordering all the hangers for the exhaust system to
> install before I take the car off the jack stands.
> Mike MacLean
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230522/d715bbe1/attachment.htm>