[Healeys] Temp sender sensor

i erbs eyera3000 at gmail.com
Fri Mar 3 06:38:51 MST 2023


Agreed.
Also, might want to put a hose clamp on it to keep it from spreading.open
clamp all the way, slide over tube, close back up on socket and tighten.
Spray with pn blaster.

Ira Erbs

On Wed, Mar 1, 2023, 6:47 PM Harold Manifold <manifold at telus.net> wrote:

> Fred,
>
> I had to make a socket to fit the temp sensor a few months ago. See
> attached picture. I used a cheap 5/8" 6 point spark plug socket from the
> local auto parts store. The socket must have flats at the top so you can
> use a wrench as the cable to the temp gauge interferes with a ratchet. The
> slot is about 3/16" wide and I cut it with a cut off disk on my angle
> grinder.
>
> Harold
>
> On Wed, Mar 1, 2023 at 3:09 PM Fred Wescoe <fredwescoe at gmail.com> wrote:
>
>> Listers,
>>
>> I am trying to remove the temp sensor from the head.  I cannot get a
>> wrench on it.
>> I know several people have cut a groove in a socket and slipped it over
>> the sensor.  Anyone have an idea what size socket I should use and cut a
>> slot in it?  Any other ideas are also appreciated.
>>
>> Thanks,
>>
>> Fred,
>> 66 BJ8
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/manifold@telus.net
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230303/c9874b7e/attachment.htm>


More information about the Healeys mailing list