[Healeys] Temp sender sensor

[m.g.sharp at sympatico.ca]

That is why you need to have the hose clamp around the socket after putting it on the nut and feeding the capillary tube through the slot.

 

From: Healeys <healeys-bounces at autox.team.net> On Behalf Of alfuller194 at gmail.com
Sent: March 1, 2023 8:06 PM
To: 'Fred Wescoe' <fredwescoe at gmail.com>; 'healeys' <Healeys at autox.team.net>
Subject: Re: [Healeys] Temp sender sensor

 

PS: don’t cut the slot too wide, lest you weaken the socket. It WILL snap off if it doesn’t have sufficient strength [says the voice of experience…].

 

----------------

All the best,

 

Al Fuller

 

From: Healeys <healeys-bounces at autox.team.net <mailto:healeys-bounces at autox.team.net> > On Behalf Of Fred Wescoe
Sent: Wednesday, March 1, 2023 1:13 PM
To: healeys <Healeys at autox.team.net <mailto:Healeys at autox.team.net> >
Subject: [Healeys] Temp sender sensor

 

Listers,

 

I am trying to remove the temp sensor from the head.  I cannot get a wrench on it.

I know several people have cut a groove in a socket and slipped it over the sensor.  Anyone have an idea what size socket I should use and cut a slot in it?  Any other ideas are also appreciated.

 

Thanks,

 

Fred, 

66 BJ8

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230302/aad94295/attachment.htm>