[Healeys] Dynamo Bearing Number

[Kees Oudesluijs]

Best to remove the bearing first to make sure you get the right 
replacement. There might be variations. The numbers are usually on the 
side of the outer ring. It will most likely be a standard bearing . 
Could be metric. Often used on dynamo's are metric SKF/TIMKEN/FAG etc 
6202-2RS or 627-2RS check first.

Kees Oudesluijs



Op 29-7-2023 om 17:22 schreef Harold Manifold:
> My dynamo is giving me the signal it is time for a new front bearing. 
> Does anyone know the universal bearing number for a Sealed Ball 
> Bearing to replace "Bearing - drive end 7H5021"?
>
> Thanks.... Harold
>

-- 
Dit e-mailbericht is met AVG-antivirussoftware gecontroleerd op virussen.
www.avg.com