[Healeys] Aluminum Trim
Michael MacLean
springer.mike51 at gmail.com
Mon Jan 16 03:38:28 MST 2023
John,
That would just elongate the holes in the shrouds and doors. That
might work if I could get behind every hole and use machine screws and nuts.
Mike M
On Mon, Jan 16, 2023, 12:45 AM John and Kerry Rowe <jtkarowe at gmail.com>
wrote:
> I assume trim is not new. Just drill new holes in the steel using the
> holes in the alloy trim as a guide
>
>
> On Mon, Jan 16, 2023 at 6:42 PM Michael MacLean <springer.mike51 at gmail.com>
> wrote:
>
>> My BN2 rebuild is coming along. Slowly, but coming along. Every so often
>> parts fit ends up giving me fits. The aluminum trim around the passenger
>> compartment is one such problem. The aluminum trim straps all have
>> different numbers on the inside, so I know they come from different cars.
>> In the case of all four pieces, the through holes for the mounting screws
>> do not line up with the holes in the body. The hole in the body is like an
>> 1/8th of an inch higher than the holes in the aluminum trim. I don't get
>> it. Am I missing something here?
>> Mike MacLean
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive/healeys
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/jtkarowe@gmail.com
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230116/861d7055/attachment.htm>
More information about the Healeys
mailing list