[Healeys] High clutch

[Michael Salter]

As long as you are sure that when the clutch is engaged (pedal up) there is
clearance at both the slave and master cylinder clevices (clevi?) you could
introduce a little air into the system (open the bleed screw and blow a
small amount in) to lower the engagement point.

M

On Sun., Aug. 13, 2023, 9:46 a.m. Don via Healeys, <healeys at autox.team.net>
wrote:

> My 65 BJ8 clutch catches after I depress the pedal about 1 to 2 inches
> from the rest position . I’ve replaced the clutch master cylinder and the
> slave cylinder. And I’ve bled the system . There’s. No slipping of the
> clutch . Car has 60,000 on it with I’m sure the original clutch. Is there
> any way to make it catch more mid way when I depress the pedal?  I know
> there are no threaded rods on either the pedal box or at the transmission
> end . Maybe a different length rod coming out of the slave cylinder?
>        Thanks , Don
>
> Sent from my iPhone
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230813/8aa9cfdf/attachment.htm>