[Healeys] Generator Bracket Thread

[Mark Donaldson]

Adding to John’s comment, here is what the two pillars look like: 6-cyl – top,  100 – bottom.

I use a Nyloc nut and flat washer on the link side.

 

Mark

 



 

From: john harper <ah100tech at gmail.com> 
Sent: Monday, 17 April 2023 3:50 AM
To: Michael Salter <michaelsalter at gmail.com>
Cc: Patrick & Caroline Quinn <p_cquinn at tpg.com.au>; healeys at autox.team.net
Subject: Re: [Healeys] Generator Bracket Thread

 

Patrick

 

A word of warning. The similar part fitted to the 100 engine is 1B1724. It looks almost the same as the AEC293 as fitted to 6-cylinder engines except that it has BSF threads and nuts. The larger is 7/16" BSF. 

 

Best regards

 

On Sun, 16 Apr 2023 at 16:17, Michael Salter <michaelsalter at gmail.com <mailto:michaelsalter at gmail.com> > wrote:

Hi Pat, that little beastie is actually called a "Pillar" and the part number is AEC293.

The thread on the end with the hex (engine plate end) is 7/16" UNF and the other (dynamo link end) is 3/8" UNF.

 

M

 

 

On Sat., Apr. 15, 2023, 10:36 p.m. Patrick & Caroline Quinn via Healeys, <healeys at autox.team.net <mailto:healeys at autox.team.net> > wrote:

Hello

Can someone please remind me of the ubusual thread size of the below support of a generator bracket fitted to a six-cylinder engine?

It’s the thread below without the nut.

Many thanks

Patrick Quinn

Blue Mountains, Australia 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20230417/fba5e256/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 273956 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20230417/fba5e256/attachment.png>