[Healeys] GB Oil Leak

[Bob Spidell]

oops .. forgot the link

https://www.amazon.com/Rectorseal-25551-8-Ounce-Thread-Sealant/dp/B000H5MW0O?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=ATVPDKIKX0DER


On 10/16/2022 9:15 PM, Bob Spidell wrote:
> The white teflon sealant usually works well enough if the the threads 
> are well-matched. Teflon tape might be a little better but, usually, 
> it isn't. This stuff works best for me in plumbing applications, 
> should be OK.
>
> Go easy on the breaker bar, it's possible to crack the case; in fact, 
> have a close look at it to check for cracking.
>
>
> On 10/16/2022 8:18 PM, Roger Grace wrote:
>> BJ8 with MT 90 oil in transmission.
>> I am struggling with an oil leak from the drain plug on my transmission.
>> The tapered thread plug, not the brass OD one.
>> On my last attempt I carefully cleaned the plug and the case thread.
>> Then used used that white Permatex thread sealant.
>> Little improvement.
>> Kept tightening with lot more torque with 16in breaker bar plus pipe.
>> Some minor improvement.
>> Fearing damage, now reluctant to do any more tightening.
>> A colleague suggests that Permatex form a gasket aviation stuff - 
>> liquid sealant in a tin ...
>> Is this a common issue - maybe a new plug ?
>> Ideas please and your collective wisdom appreciated.
>> rg
>>
>>
>>
>>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys 
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>