[Healeys] Wix 51516XP oil filter

Tue Nov 8 18:52:49 MST 2022

Esa es mucho más fácil

________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Stephen Hutchings via Healeys <healeys at autox.team.net>
Sent: Tuesday, November 8, 2022 9:04:55 PM
To: Jim Ryan <ryan at jimryan.com>
Cc: List Healey <healeys at autox.team.net>
Subject: Re: [Healeys] Wix 51516XP oil filter

I too changed to a spin on filter, but mine came from AH spares, and I think I have a different WIX number.
When I had the original system, I found it much easier to take the whole assembly off the side of the block, change the filter on the bench, and then reinstall with a new gasket. I remember Rich Chrysler saying he did it that way too. A lot less mess.

Stephen, BJ8

On Nov 8, 2022, at 5:40 PM, Jim Ryan <ryan at jimryan.com<mailto:ryan at jimryan.com>> wrote:

I'm pretty sure that was the same one I had on my BJ7.  Worked great.

On Tue, Nov 8, 2022, 10:19 AM BJ8Healeys via Healeys <healeys at autox.team.net<mailto:healeys at autox.team.net>> wrote:

I got one of Moss’s first “spin on” adapters in the late ‘80s because of the mess caused by the original canister, and the need to special-order the replacement cartridges.  This adapter holds the spin-on filter parallel to the centerline of the car, with the aft end of the filter lower than the front.  Changing oil is easy and causes no mess.  I don’t know if this type of adapter is still available, but the one I have is the only one I’ve ever seen.  All the others hold the filter perpendicular and level to the block and seem to be sized for a smaller filter than what I use.
I have several Wix 51085 filters, and all except one (China) are marked “Made in USA”.  I remember back in the ‘60s that I used to pass the Wix plant in Gastonia, NC about once a week.

Steve Byers

HBJ8L/36666

BJ8 Registry

AHCA Delegate at Large

Havelock, NC  USA

From: Healeys [mailto:healeys-bounces at autox.team.net<mailto:healeys-bounces at autox.team.net>] On Behalf Of Michael Oritt via Healeys
Sent: Tuesday, November 8, 2022 7:26 AM
To: Alan Seigrist
Cc: Healeys at autox.team.net<mailto:Healeys at autox.team.net>
Subject: Re: [Healeys] Wix 51516XP oil filter

I use K&N 2009's which fasten to the engine laterally and wish I could find a spin-on adaptor that has the filter facing (open-end) up simply because it is much easier to avoid a mess.

Best--Michael Oritt

On Mon, Nov 7, 2022 at 10:32 PM Alan Seigrist <healey.nut at gmail.com<mailto:healey.nut at gmail.com>> wrote:

yes generally if the filter is pointed down, the bigger the better... usually the wider it is is more preferable to the longer it is.

But for filter conversions on our healeys, they normally sit sideways so you gotta get it with the oil bypass valve

On Tue, Nov 8, 2022 at 9:52 AM Simon Lachlan via Healeys <healeys at autox.team.net<mailto:healeys at autox.team.net>> wrote:

As a corollary to this topic, a question…..

If one has two filters identical in all respects except size, would the bigger of the two be better? ie, does size matter?

I only ask because I have latterly been using large filters, Mann W1130/1. Made in Germany.:-

MANN-FILTER Online Catalog Europe - Product Details Oil Filter W 1130/1<https://catalog.mann-filter.com/EU/eng/catalog/MANN-FILTER%20Katalog%20Europa/Oil%20Filter/W%201130~1>

Impossible with the original Lucas starter.

Any ideas?

Thanks,

Simon

From: Healeys <healeys-bounces at autox.team.net<mailto:healeys-bounces at autox.team.net>> On Behalf Of Jean Caron
Sent: 07 November 2022 20:10
To: fsufan1952 at yahoo.com<mailto:fsufan1952 at yahoo.com>; Warren Dietz <flyhihealey at gmail.com<mailto:flyhihealey at gmail.com>>
Cc: Healeys at autox.team.net<mailto:Healeys at autox.team.net>
Subject: Re: [Healeys] Wix 51516XP oil filter

Don,

It makes absolutely no difference where the filter is made unless the manufacturer specifies different material in its manufacturing process. Absolutely every step of the fabrication is automated and made by robots except the step of lining up  the bottom part of the filter and I doubt an American can drop it in place any better than a Chinese. See a video on YouTube how Fram filters are made.

Given the relatively low price of an oil filter, I would still change the filter every oil change.

Jean

Sent from my Bell Samsung device over Canada’s largest network.

________________________________

_______________________________________________
Support Team.Net<http://Team.Net> http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com

_______________________________________________
Support Team.Net<http://Team.Net> http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/michael.oritt@gmail.com

_______________________________________________
Support Team.Net<http://Team.Net> http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ryan@jimryan.com

_______________________________________________
Support Team.Net<http://Team.Net> http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net<mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/s.hutchings@rogers.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20221109/02efc476/attachment.htm>