[Healeys] 100 H4 carb jets

[S and T Miller]

Anyone come up with any good tricks to seal the jets from leaking, and stay centered? I chamfered the jet side holes so not to tear the "upgraded" o-rings but still seeps fuel. Tried three sets with with no success. Also the jet bearing doesn't seem to stay centered and it's easy to move the jet assembly around from underneath.  I stretched out the old gland springs and that seemed to help, so I installed new gland springs and still not great. Thinking of stretching out the new gland springs and use new oil soaked cork seals, as original.  Thoughts?
TIA, Shawn

The Millers

"Always drive them, but remember each drive in an antique car is a test drive."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220531/a03d2771/attachment.htm>