[Healeys] Re - BN2 Wiper rack fit

[i erbs]

Except in the summer. Best climate anywhere

On Mon, May 16, 2022, 1:59 PM Mark Donaldson <ardmorebusiness at xtra.co.nz>
wrote:

> Bill Bolton told me many years ago:  “Oregonians don’t tan, they rust”.
>
>
>
> Mark
>
> Ardmore, NZ
>
>
>
> *From:* Michael MacLean <rrengineer.mike at att.net>
> *Sent:* Monday, 16 May 2022 10:22 AM
> *To:* Michael MacLean <springer.mike51 at gmail.com>; i erbs <
> eyera3000 at gmail.com>
> *Cc:* Ahealey help <healeys at autox.team.net>; mike brooks <
> hypercubic at yahoo.co.uk>
> *Subject:* Re: [Healeys] Re - BN2 Wiper rack fit
>
>
>
> You guys do seem to get some precipitation up there in the northern areas.
>
> Mike M
>
>
>
> On Sunday, May 15, 2022, 03:00:39 PM PDT, i erbs via Healeys <
> healeys at autox.team.net> wrote:
>
>
>
>
>
> I live in Oregon,  my current two speed wiper on or off can be lacking
> when we get caught in a monsoon
>
>
>
> On Sun, May 15, 2022, 1:16 PM Michael MacLean <springer.mike51 at gmail.com>
> wrote:
>
> Mike,
>
>      Another resource for parts is always welcome.  Not sure if I need a 2
> speed system though.  In the 30 years I have owned my Bugeye/Frogeye I have
> only been caught in the rain once here in Southern California.  Usually if
> it is raining I take the Honda or even my MGB GT if it's just light rain.
> The Healeys just never see any moisture from above and live life in my
> garage most of the time.  Thanks you for the suggestion as tempting as it
> is though.
>
> Mike MacLean
>
>
>
> On Sun, May 15, 2022 at 7:13 AM mike brooks <hypercubic at yahoo.co.uk>
> wrote:
>
> SVC (Stafford Vehicle Components) in the UK can supply the rack and Bundy
> tubing, flares, crank pin etc. to make your own rack. Their website also
> had a downloadable guide which shows how all the parts hang together. You
> might be better off starting again with new components that you can design
> to fit. You would also get a nice two speed motor. Replacing the pull
> switch with a "pull, turn and pull again" switch like the lighting switch
> would provide a two position switch which would take the original wiper
> switch knob.
>
>
>
> Note I haven't done the above on my BN2, but I'm fairly sure SVC would be
> able to supply something that would work. They were very helpful a few
> years ago when I was building  a kit car. No commercial interest etc.
>
>
>
> Mike Brooks
>
> '56 BN2
>
> Scotland
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
>
> http://autox.team.net/mailman/options/healeys/eyera3000@gmail.com
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> <http://www.team.net/pipermail/healeys%20>
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220516/eb9c246f/attachment.htm>