[Healeys] Front caliper rebuilds

[Bob Haskell]

Don,

I have used a small grease gun to remove stuck pistons.  I remove the 
Zerk coupler and screw the tube into the caliper's brake line hole.  Use 
a C clamp to hold the freed piston in place.

Cheers,

Bob Haskell
Austin Healey 3000 BN7/BT7 registrar

On 6/10/22 10:55 PM, Don Day via Healeys wrote:
> I’m working on my 65 BJ-8 front calipers . Car has sat for 10 to 15 years . I’m rebuilding the calipers and I can only get one of the calipers pistons to come out. After removing the caliper I’ve applied air pressure to the inlet and I was only able to free up the outside piston . What can be done to free up the inboard piston ?
>      Any suggestions would be appreciated.
>              Thanks , Don
>
> Sent from my iPad
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>